Gateway 310 aafes ユーザーガイド
175
Troubleshooting
www.gateway.com
Power
My system is turned on but nothing is getting power
■
If your computer is plugged into a surge protector, make sure that the surge
protector is securely connected to an electrical outlet, switched on, and
working correctly.
protector is securely connected to an electrical outlet, switched on, and
working correctly.
■
Make sure that the electrical outlet is working by plugging a working
device, such as a lamp, into the outlet, then turning it on to test the outlet.
device, such as a lamp, into the outlet, then turning it on to test the outlet.
■
Make sure that all devices are connected securely to the surge protector
and correctly switched on.
and correctly switched on.
Printer
Printer will not turn on
■
Make sure that the power cord is plugged into an AC power source.
■
Make sure that the electrical outlet is working by plugging a working
device, such as a lamp, into the outlet, then turning it on to test the outlet.
device, such as a lamp, into the outlet, then turning it on to test the outlet.
Printer is on but will not print
■
Make sure that the printer is online. Many printers have an online/offline
button that you may need to press.
button that you may need to press.
■
If the printer you want to print to is not the default printer, make sure
that you have selected it in the printer setup.
that you have selected it in the printer setup.
To set a default printer:
1
Click
Start
, then click
Control Panel
. The Control Panel window opens.
If your Control Panel is in Category View, click
Printers and Other
Hardware
.
2
Click/Double-click the
Printers and Faxes
icon. The Printers and Faxes
window opens.
3
Right-click the name of the printer you want to be the default
printer, then click
printer, then click
Set as Default Printer
.
■
Make sure that the cable between the printer and your computer is
connected securely to the correct port.
connected securely to the correct port.