Heartland 9730 ユーザーガイド
9
Important Safety Instructions
Oven Safety
DO NOT TOUCH HEATING ELEMENTS OR INTERIOR SURFACES OF OVEN-Heating elements may be hot even though
they are dark in color. Interior surfaces of an oven become hot enough to cause burns.
During and after use, do not touch, or let clothing or other flammable materials contact heating elements or interior surfaces
of oven until they have had sufficient time to cool.
Other surfaces of the appliance may become hot enough to cause burns. For example, oven vent opening surfaces near
these openings and oven doors. Do not set cooking utensils directly on oven floor!
they are dark in color. Interior surfaces of an oven become hot enough to cause burns.
During and after use, do not touch, or let clothing or other flammable materials contact heating elements or interior surfaces
of oven until they have had sufficient time to cool.
Other surfaces of the appliance may become hot enough to cause burns. For example, oven vent opening surfaces near
these openings and oven doors. Do not set cooking utensils directly on oven floor!
Note: In the lower oven the bake element is contained under the oven floor. This facilitates easier cleaning and more usable
space in the oven.
1.
Use care when opening door - let hot air or steam escape before removing or replacing food.
2.
Do not heat unopened food containers - build-up of pressure may cause container to burst and result in injury.
3.
Keep oven vent ducts clear of obstruction. See illustration below
4.
Placement of oven racks-always place oven racks in desired location while oven is cool. If rack must be moved while
oven is hot, do not let pot holder contact hot heating element in oven.
oven is hot, do not let pot holder contact hot heating element in oven.
Self Clean Safety Instructions
Read the instructions below and the appropriate timer instructions before attempting to operate. Do not leave
food or cooking utensils, etc, in the oven during self-cleaning mode of operation.
food or cooking utensils, etc, in the oven during self-cleaning mode of operation.
Do not touch heating elements or interior surfaces of oven—heating elements may be hot even though they are dark
in colour. Interior surfaces of an oven become hot enough to cause
burns.
in colour. Interior surfaces of an oven become hot enough to cause
burns.
During and after use, do not touch, or let clothing or other
flammable materials to contact heating elements or interior
surfaces of oven until they have had sufficient time to cool.
flammable materials to contact heating elements or interior
surfaces of oven until they have had sufficient time to cool.
Other surfaces of the appliance may become hot enough to
cause burns—among these surfaces are, for example, oven
vent openings, oven doors and surfaces near these openings.
cause burns—among these surfaces are, for example, oven
vent openings, oven doors and surfaces near these openings.
1. Remove utensils and cookware from the oven. Oven
racks and rack supports should be removed from the oven.
Racks and supports left in the oven during self clean will
become discoloured, but it will not
affect the protective coating.
racks and rack supports should be removed from the oven.
Racks and supports left in the oven during self clean will
become discoloured, but it will not
affect the protective coating.
2. DO NOT clean the gasket. The
door gasket is essential for a good
seal. Care should be taken not to
rub, damage or move the gasket.
door gasket is essential for a good
seal. Care should be taken not to
rub, damage or move the gasket.
3. Never use a commercial oven
cleaner in a self cleaning oven. This will damage the finish.
cleaner in a self cleaning oven. This will damage the finish.
4. Make sure the convection fan and oven light is off. The convection
fan and light switch must be turned off at the control panel.
fan and light switch must be turned off at the control panel.
Vents must be
kept clear of
obstructions
kept clear of
obstructions
Safety