Heartland 3015 ユーザーガイド

To avoid electrical shock which can cause severe
personal injury or death, disconnect power to
refrigerator before replacing light bulb. After
replacing light bulb, reconnect power.

To avoid personal injury or property damage,
observe the following:

• Allow light bulb to cool.

• Wear gloves when replacing light bulb.

1. Slide clear light shield

toward back of
compartment to
release from light
assembly.

 2. Remove light bulbs.

 3. Replace with

appliance bulbs 

.

  4. Replace light bulb cover by inserting tabs on light

shield into liner holes on each side of light
assembly. Slide shield toward front of refrigerator
until it locks into place. Do not force shield
beyond locking point. Doing so may damage light
shield.

1. Reach behind the
light cover.

2. With firm pressure,
press forward on the
notches at the back of
the cover and pull down
the cover will open
from the back.

3. Remove the cover.

4. Remove light bulb.

5. Replace bulb with
appliance bulb 

.

6. Insert front tabs of
light cover into slots in
freezer liner and snap
rear portion over light
assembly until rear tab
engages.