SouthWing neo-507 ユーザーガイド

10 General Usage 

A call can be initiated by the mobile phone or with the
Headset itself (depending on the capabilities of your
mobile phone).

IInniittiiaattiinngg  aa  ccaallll  ffrroom

m  yyoouurr  m

moobbiillee  pphhoonnee

11.. Ensure your Headset is switched on.
22.. Ensure that your mobile phone has been correctly
paired to your Headset and that the Bluetooth mode
has been enabled.
33.. Make a call as usual with your phone. Your phone
will transfer the call to your Headset.

V

Vooiiccee  ddiiaalllliinngg  ffrroom

m  yyoouurr  H

Heeaaddsseett

Depending on your mobile phone, you may be able to 
initiate phone calls from your Headset (your phone will
need to support voice dialling).

To activate the voice dialling, briefly press the
Multi-function Dial [11] on the Headset. If sup-
ported, you will hear a series of tones and

then be able to speak the name of the person you
wish to call, resulting in the call being initiated.

You can check at any time the battery level.
With the Headset turned on, if you press four
times the Multi-function dial [11], you will 
repeatedly hear a battery level indication:

··   4 tones for a remaining talk-time above 4 hours.
··   3 tones for a remaining talk-time around 3 hours.
··    2 tones for a remaining talk-time around 2 hours.
··    One tone for a remaining talk-time between ten

m

minutes and approximately one hour and a half.

··    A warning tone (high-low-high) will sound when   

r

remaining talk-time falls below ten minutes.

1

4x