Juniper DPCE-R-40GE-SFP ユーザーズマニュアル
ATM MIC with SFP
Figure 5: 8-Port ATM MIC with SFP
g006584
MIC-3D-OCx-ATM
•
Junos 12.1 and later
For information on which MPCs support this MIC, see
. For
information on which MICs are supported on MX Series routers, see
.
Software release
•
Rate-selectable using one of the following rates:
•
8-port OC3
•
2-port OC12
•
Power requirement: 0.73 A @ 48 V (35 W)
•
Weight: 1.2 lb (0.54 kg)
•
Model number: MIC-3D-8OC3-2OC12-ATM
Description
•
High-performance parsing of SONET/SDH frames
•
Packet segmentation and reassembly (SAR) management and output port queuing
•
Packet buffering, Layer 2 parsing
•
Line rate throughput for each port
Hardware features
•
Circuit cross-connect (CCC) for leveraging ATM access networks
•
User-configurable virtual circuit (VC) and virtual path (VP) support
•
Support for idle cell or unassigned cell transmission
•
OAM fault management processes alarm indication signal (AIS), remote defect indication
(RDI) cells, and loop cells
(RDI) cells, and loop cells
•
Point-to-point and point-to-multipoint mode Layer 2 counters per VC and per VP
•
Local and remote loopback
•
Simple Network Management Protocol (SNMP):
•
Management Information Base (MIB) 2 (RFC 1213)
•
ATM MIB (RFC 1695)
•
SONET MIB
•
PWE3 MIB (RFC 5603)
•
PW-ATM-MIB (RFC 5605)
•
PW-FRAME-MIB (RFC 5601)
•
MIB for CoS
•
Unspecified bit rate (UBR), non-real-time variable bit rate (VBR), and constant bit rate (CBR)
traffic shaping
traffic shaping
•
Per-VC or per-VP traffic shaping
•
Support for F4 OAM cells
•
Support for 16 bit VCI range
Software features
Copyright © 2013, Juniper Networks, Inc.
120
MX Series 3D Universal Edge Routers Line Card Guide