Juniper DPCE-R-40GE-SFP ユーザーズマニュアル
Channelized E1/T1 Circuit Emulation MIC
Figure 19: Channelized E1/T1 Circuit Emulation MIC
g006681
MIC-3D-16CHE1-T1-CE
0
8
7
15
•
Junos OS Release 12.3 and later
Software release
•
Sixteen E1 or T1 ports
•
Per-MIC E1/T1 framing
•
DS1 channelization per MIC:
•
1 DS1 channel
•
24 DS0 channels
•
E1 channelization per PIC:
•
1 E1 channel
•
32 DS0 channels
•
Internal and loop clocking
•
Power requirement: 2.21 A @ 12 V (26.55 W)
•
Weight: 1.57 lb (0.71 kg)
•
Model number: MIC-3D-16CHE1-T1-CE
Description
•
Ports are numbered:
•
Top row: 8 and 15 from left to right
•
Bottom row: 0 and 7 from left to right
Hardware features
•
Full bit error rate test (BERT)
•
DS1 and E1 interfaces are selectable on a per-port granularity
•
Per-port framing is not supported
•
You can configure the following framing modes using the CLI:
•
T1—SF, ESF, D4/superframe, ESF (extended superframe)
•
E1—G704, G704–no-crc4, unframed
•
Local, remote, and per-port loopback diagnostics
•
Encapsulations:
•
Pseudowire Emulation Edge to Edge (PWE3) Architecture (RFC 3985)
•
Requirements for Pseudowire Emulation Edge to Edge (PWE3) (RFC 3916)
•
Structure-Agnostic Time Division Multiplexing (TDM) over Packet (SAToP) (RFC 4553)
•
Structure-Aware Time Division Multiplexed (TDM) Circuit Emulation Service over Packet-Switched
Network (CESoPSN) (RFC 5086)
Network (CESoPSN) (RFC 5086)
•
Pseudowire Emulation Edge to Edge (PWE3) Control Word for Use over an MPLS PSN (RFC 4385)
Software features
•
RJ-48 connector
Cables and
connectors
connectors
Copyright © 2013, Juniper Networks, Inc.
148
MX Series 3D Universal Edge Routers Line Card Guide