Juniper DPCE-R-40GE-SFP ユーザーズマニュアル

ページ / 198
Protocols and Applications Supported by the Multiservices DPC (MS-DPC)
contains the first Junos OS Release support for protocols and
applications on the MX240, MX480, and MX960 Multiservices DPCs. A dash indicates
that the protocol or application is not supported.
NOTE:
The maximum number of supported MS-DPCs is as follows except
where noted in
:
MX240 router: 2
MX240 router: 4
MX960 router: 6
Table 6: Protocols and Applications Supported by the Multiservices DPC
(MS-DPC)
MS-DPC
Protocol or Application
9.3
Accepts traffic destined for GRE tunnels
9.3
Active flow monitoring exports cflowd version 5 and
version 8 records
9.3
Active flow monitoring exports flow monitoring version 9
records, based on RFC 3954
9.4
Graceful Routing Engine Switchover (GRES)
9.3
GRE dont fragment
9.3
GRE Key
9.3
GRE reassembly
9.3
IP Security (IPSec) encryption
9.3
Network Address Translation (NAT) for IP addresses
NOTE:
The MX960 supports 8 MS-DPCs using this
feature.
10.2
Packet-triggered dynamic subscribers and policy control
(PTSP)
9.3
Port Address Translation (PAT) for port numbers
9.3
Real-time Performance Monitoring (RPM)
71
Copyright © 2013, Juniper Networks, Inc.
Protocols and Applications Supported by the Multiservices DPC (MS-DPC)