KYOCERA km-1500 ユーザーズマニュアル

Press the Number of Copies / Zoom(+) or Number of 
Copies / Zoom(-) key to select the appropriate paper size. 
The displayed code numbers refer to the available paper 
sizes as explained in the following table.

Press the Recall%/Enter key.
The displayed numbers will flash and the copier will return 
to a copy-ready state.

Standard copy paper (60 g/m² – 90 g/m²), thick paper (90 g/m² – 
163 g/m²), color paper, OHP transparencies and letterhead paper 
can be set on the multi-bypass tray.
ALWAYS use the multi-bypass tray when copying onto special 
paper.

The sizes of paper that can be set on the multi-bypass tray are as 
follows:
Inch Specification
8

1/2

" × 14" (Legal) – 5

1/2

" × 8

1/2

" (Statement)

Metric Specification
A4 – A6R, and Folio

The types of paper and the number of sheets that can be set on the 
multi-bypass tray at one time are as follows:
• Standard paper (80 g/m²): 50 sheets
• Thick paper (120 g/m²): 25 sheets
• Thick paper (160 g/m²): 10 sheets
• OHP transparencies: 1 sheet

• After setting paper on the multi-bypass tray, be sure to 

use the operation panel to select the size of that paper. 
(See page 3-7.)

• If you want to copy onto non-standard size paper, be 

sure to use the “F15” (Non-Standard Size Paper Width) 
default item to register the paper size. (See page 6-3.)

• When using thick copy paper (90 g/m² – 105 g/m²), be 

sure to select the Thick Paper mode. (See page 3-9.)

• When using OHP transparencies, be sure to use a type 

of film that can withstand the heat of the fixing 
process. The following products are recommended:
Arkwright (LTR)
3M PP2500 (A4)

-A4

A4

-A5

A5

-Fo

Folio

-Lg

Legal (8 

1/2

" × 14")

-Lt

Letter (8 

1/2

" × 11")

-o2

Oficio II (8 

1/2

" × 13")