KYOCERA km-1500 ユーザーズマニュアル

If trouble occurs with your copier, carry out the applicable checkpoints and procedures indicated on the following pages. If the trouble persists, 
contact your service representative or authorized service center.

Nothing lights on the 
operation panel when the 
power switch is turned ON.

Is the power plug connected to an AC 
outlet?

Connect the plug to an AC outlet.

—

No copies come out when the 
Start key is pressed.

Is there some indication of the trouble on 
the operation panel?

Check the appropriate response to that 
indication and perform the corresponding 
procedure.

The copies come out blank.

Were the originals set correctly?

When setting originals on the platen, set 
them face-down.

When setting originals in the optional 
Document Processor, set them face-up.

The copies come out too light.

Is the copier in the Auto Exposure 
Adjustment mode?

In order to adjust the overall exposure 
level, perform the “Auto Exposure 
Adjustment” procedure.

Is the copier in either the Photo, Text & 
Photo, or Text mode?

Adjust the exposure to the correct level 
using the copy exposure adjustment keys.

To adjust the overall exposure, perform 
the corresponding exposure adjustment 
procedure.

Is the copier in the Eco-Copy mode?

Select an image quality mode other than 
the Eco-Copy mode.

Is the Add Toner indicator lit?

Replace the toner container.

Is the copy paper wet?

Replace the copy paper with new paper.

The copies come out too dark.

Is the copier in the Auto Exposure 
Adjustment mode?

In order to adjust the overall exposure 
level, perform the “Auto Exposure 
Adjustment” procedure.

Is the copier in either the Photo, Text & 
Photo, or Text mode?

Adjust the exposure to the correct level 
using the copy exposure adjustment keys.

To adjust the overall exposure, perform 
the corresponding exposure adjustment 
procedure.

The copies are dirty.

Is the platen or the optional Document 
Processor dirty?

Clean the platen and/or the optional 
Document Processor.

Remove the Process Unit and perform the 
cleaning operation on the charger.