LG 29WR30MR オーナーマニュアル
17
ENG
ENGLISH
ENTERTAINMENT
ENTERTAINMENT
Connecting to a wired network
(Depending on model)
Connect the display to a local area network (LAN)
via the LAN port as shown on the following illustra-
tion and set up the network settings.
This monitor only supports a wired network con-
nection.
After making a physical connection, a small
number of home networks may require the display
network settings to be adjusted. For most home
networks, the display will connect to automatically
without any adjustments.
For detail information, contact your internet pro-
vider or router manual.
via the LAN port as shown on the following illustra-
tion and set up the network settings.
This monitor only supports a wired network con-
nection.
After making a physical connection, a small
number of home networks may require the display
network settings to be adjusted. For most home
networks, the display will connect to automatically
without any adjustments.
For detail information, contact your internet pro-
vider or router manual.
y
Do not connect a modular phone cable to the
LAN port.
LAN port.
y
Since there are various connection meth-
ods, please follow the specifications of your
telecommunication carrier or internet service
provider.
ods, please follow the specifications of your
telecommunication carrier or internet service
provider.
y
Network setting menu will not be available
until the display is connected to physical
network.
until the display is connected to physical
network.
y
Since there are various connection meth-
ods, please follow the specifications of your
telecommunication carrier or internet service
provider.
ods, please follow the specifications of your
telecommunication carrier or internet service
provider.
To set up the network seetings: (Even if your dis-
play has already connected automatically, running
setup again will not harm anything),
play has already connected automatically, running
setup again will not harm anything),
1
Press
MENU to access the main menus.
2
Press the Navigation buttons to scroll to
NET-
WORK
and press
OK
.
3
Press the Navigation buttons to select
Net-
work Setting
and press
OK
. If Interface Select
is set to RS-232C, change the Interface Select
setting to LAN.
setting to LAN.
4
Select
DHCP
or
Customer Setting
.
- If selecting
Customer Setting
, press the
Navigation and Number buttons. IP address-
es will need to be input manually.
es will need to be input manually.
-Press OK and use Up, Down, Number keys to
change the values. Press OK again to finish
changing values.
changing values.
-
DHCP
: Select this if there is a DHCP server
(Router) on the local area network (LAN) via
wired connection, the display will automatical-
ly be allocated an IP address. If you’re using
a broadband router or broadband modem that
has a DHCP (Dynamic Host Configuration
Protocol) server function. The IP address will
automatically be determined.
wired connection, the display will automatical-
ly be allocated an IP address. If you’re using
a broadband router or broadband modem that
has a DHCP (Dynamic Host Configuration
Protocol) server function. The IP address will
automatically be determined.
5
When you are finished, press
EXIT
.
Internet
CAUTION
CAUTION