LG HS-C1865NN8 オーナーマニュアル
13
ENG
ENGLISH
ADVANCED FUNCTIONS
OPERATING THE AIR CONDITIONER
WITHOUT THE REMOTE CONTROL
REsTARTING THE AIR CONDITIONER
AUTOMATICALLY
DIsABLING AUTO REsTART
you can use the On/Off button of the indoor unit
to operation the air conditioner when the remote
control is unavailable. However, the fan speed is
set to high.
1. press the On/Off button.
to operation the air conditioner when the remote
control is unavailable. However, the fan speed is
set to high.
1. press the On/Off button.
When the air conditioner is turned on again after
a power failure, this function restores the previous
settings. This function is a factory default setting.
a power failure, this function restores the previous
settings. This function is a factory default setting.
1. press the On/Off button and hold it for 6 seconds.
- The unit will beep twice and the lamp will blink
twice 4 times.
- The unit will beep twice and the lamp will blink
twice 4 times.
*The feature can be changed according a type
of model.
- To re-enable the function, press the On/Off button
and hold it for 6 seconds. The unit will beep twice
and the lamp will blink 4 times.
of model.
- To re-enable the function, press the On/Off button
and hold it for 6 seconds. The unit will beep twice
and the lamp will blink 4 times.
*The feature can be changed according a type
of model.
of model.
- For cooling only model, the temperature is set
to 22°C.
to 22°C.
- For cooling and heating model, the operation mode
changes, depending on the room temperature.
changes, depending on the room temperature.
Room Temp.
set Temp.
Operation mode
Below 21°C
24°C
Heating opera-
tion
tion
Above 21°C
and below
24°C
and below
24°C
23°C
Dehumidifying
operation
operation
Above 24°C
22°C
Cooling opera-
tion
tion
NOTE
• If you press and hold the On/Off button for 3-5
seconds, the unit will switch to the test operation.
In the test operation, the unit blows out strong
air for cooling for 18 minutes and then returns
to the factory default setting.
seconds, the unit will switch to the test operation.
In the test operation, the unit blows out strong
air for cooling for 18 minutes and then returns
to the factory default setting.
!
On/Off button
On/Off button
Rev : 05 (12T14)