Da-Lite Boardroom Electrol 40750 プリント

製品コード
40750
ページ / 2
SUGGESTED METHODS OF INSTALLATION
SPECIFICATION DATA
S
UGGESTED SPECIFICATIONS:  ___________________  projection screen(s),  _________________ (H) x  ________________  (W), electrically 
operated 120 volt (60Hz), not more than 2.4 amp. Shall have specially designed motor mounted inside the roller, to be three wire with 
ground, quick reversal type, oiled for life, with automatic thermal overload cutout, integral gears, capacitor and an electric brake to 
prevent coasting. To have preset but adjustable limit switches to automatically stop picture surface in the “down” position. The roller to 
be of rigid metal. Screen fabric to be flame retardant and mildew resistant fiberglass with black masking borders standard. Bottom of 
fabric shall be formed into a pocket holding a metal rod. The ends of the rod shall be protected by heavy-duty plastic caps. Case to be 
of wood with metal-lined wiring compartment. A section of the bottom of the case shall be a door equipped with hinges so that it 
opens and closes automatically with the lowering and raising of the picture surface. When the picture surface is being lowered, the 
door shall drop open by gravity. When the picture surface is being raised, the two ends of the slat in the bottom pocket of the screen 
fabric shall engage two hooks on the door to lift it to the closed position where the door will engage a micro switch that will cut off the 
electrical current to the motor. The balance of the bottom of the case shall be a second hinged door with manual opening to provide 
access. Hinges shall be mounted to allow matching of the doors to the ceiling. Case to be finished with a black primer coat, ready to 
accept final finish by others. To be complete with three position control switch with cover plate. Screen to be listed by Underwriters’ 
Laboratories.
Matte White: Seamless in all sizes.
Video Spectra 1.5:   Available in sizes where both dimensions do not exceed 8'.
High Power
®
Available in sizes up to 9'x 12'. Horizontal seam required when both dimensions exceed 6'.
Boardroom ElEctrol
®
Automatic Electric Projection Screen Model
DA-LITE SCrEEN COMPANy, INC.
3100 North Detroit Street
Post Office Box 137
Warsaw, Indiana 46581-0137
Phone: 574-267-8101
800-622-3737
Fax: 574-267-7804
Toll Free Fax: 877-325-4832
www.da-lite.com
e-mail: info@da-lite.com
Select installation method according to ceiling type.
Offset mounting, recessed above ceiling. 
For plaster, dry wall, tile or paneling. Doors 
and bottom of case painted same finish as 
ceiling.
Offset mounting, recessed above ceiling. 
May be adapted for 3/4" ceiling, but cut to 
1/4" thick under doors and screen case.
Flush mounting, recessed above ceiling. 
May be adapted for 1/4" paneling for ceil-
ing and doors.
Flush mounting, recessed above ceiling. For use 
with dropped ceiling. May also be adapted for 
use with acoustical or other ceiling 3/4" thick but 
cut to 1/4" thick under doors and screen case.
 
METHOD A
 
METHOD B
 
METHOD C
 
METHOD D
“L“
BrACKET
MOUNTING
BrACKET
MOUNTING
JOIST
(SUGGESTED) 
1/4" BOLT
(SUGGESTED) 
1/4" LAG
SCrEWS
ACCESS
DOOr
PICTUrE
SUrFACE
DOOr
7-3/8" 
1-1/2" 
1-1/2" 
3/4" 
1/4" 
2-1/2" 
2-1/2" 
3/4" FINISHED
CEILING
FUrrING
STrIP
SLAT
HOOK
1/4" x 1"
SCrEW
& T-NUT
DryWALL
SCrEW
PICTUrE
SUrFACE
3/8" STEEL
SLAT IN
POCKET
“L“
BrACKET
MOUNTING
BrACKET
MOUNTING
JOIST
(SUGGESTED) 
1/4" BOLT
(SUGGESTED) 
1/4" LAG 
SCrEWS
ACCESS
DOOr
PICTUrE
SUrFACE
DOOr
7-3/8" 
1-1/2" 
1-1/2" 
3/4" 
1/4" 
2-1/2" 
2-1/2" 
3/4" FINISHED
CEILING
FUrrING
STrIP
SLAT
HOOK
1/4" x 1"
SCrEW
& T-NUT
DryWALL
SCrEW
PICTUrE
SUrFACE
3/8" STEEL
SLAT IN 
POCKET
“L“
BrACKET
MOUNTING
BrACKET
MOUNTING
JOIST
(SUGGESTED) 
1/4" BOLT
(SUGGESTED) 
1/4" LAG
SCrEWS
ACCESS
DOOr
PICTUrE
SUrFACE
DOOr
7-
3/8" 
1-1/2" 
1-1/2" 
3/4" 
1/4" 
2-1/2" 
2-1/2" 
3/4" FINISHED
CEILING
FUrrING
STrIP
SLAT
HOOK
1/4" x 1"
SCrEW
& T-NUT
DryWALL
SCrEW
PICTUrE
SUrFACE
3/8" STEEL 
SLAT IN 
POCKET
“L“
BrACKET
MOUNTING
BrACKET
MOUNTING
JOIST
(SUGGESTED) 1/4" BOLTS
ACCESS
DOOr
PICTUrE
SUrFACE
DOOr
4-5/16" 
1-1/2" 
3/4" 
1/4" 
2-1/2" 
2-1/2" 
T BAr
FUrNISHED
WITH CEILING
FUrrING
STrIP
SLAT HOOK
1/4" x 1"
SCrEW
& T-NUT
DryWALL
SCrEW
PICTUrE
SUrFACE
3/8" STEEL 
SLAT IN 
POCKET
NOTE: CAN BE PAINTED THE SAME AS DOOr
8" 
8-1/4" 
CEILING TILE CUT TO 1/4" THICK (ATTACH WITH MASTIC)
8-1/4" 
MOUNTING
JOIST
8-1/4" 
SUSPENDED
CEILING
TILE
CEILING TILE CUT TO 1/4" THICK (ATTACH WITH MASTIC)
MOTOr END
ELECTrICAL
OUTLET
MOUNTING
BrACKET
“L” BrACKET
(8' AND ABOVE)
3/4"
FABrIC HEIGHT X WIDTH
AS OrDErED, UP TO
12 FEET X 12 FEET.
6-3/4"
6-3/4"
7-3/8"
8"
CASE LENGTH = FABrIC WIDTH
+ 13-1/2", ALL SIZES
AUDIENCE 
SIDE
AUDIENCE 
SIDE
AUDIENCE 
SIDE
AUDIENCE 
SIDE
1/2"
1/2"
WHEN OrDErING, MArK APPrOPrIATE SELECTIONS:
Select size from charts on other side.
Select viewing surface:
o
  Matte White
  o  Video Spectra 1.5
o
  High Power
®
  o  High Contrast High Power
®
 GreenGuard
®
 and GreenGuard
®
 Children and 
Schools Certified.
Optional Accessories:
o
  Extra Drop available to lower picture area more than 
normal. 
 
Specify total drop at top _____  (black or white) or at 
bottom _____ (black or white). 13' maximum total 
surface height including picture area.
o
  Single Motor Low Voltage Control (LVC) - external.
o
  Wireless Remote Control for LVC.
 o
  Radio Frequency Remote.
  o  Radio Frequency Range Extender available
 o
  Infrared Remote.
o
  Key Locking Cover Plate for 120V or LVC Switch.
o
  Silent Motor.
o
  Key Operated Switch for 120V only (NOTE: Cannot 
be used with LVC).
o
  No Borders (Black masking borders standard).
o
  220 Volt (50 Hz) Motor.
o
  Video Projector Interface Control - external.
o
  External SCB-100 - RS-232 Serial Control Board
 
o
  NET-100 Ethernet-Serial Adapter
o
  White doors (brushed aluminum standard).
o
  White box (black standard).
 Project:
 Architect:
 Phone:
 Contractor:
 Phone:
 Supervisor:
 Phone:
 Supplier:
 Date:
 Revised:
1-1/2"
1/2"1/2"
(black or white)
(black or white)