LG 50PA6500 オーナーマニュアル

42

PENTOUCH

Unpairing (Resetting touch pen) 

   

1

  Pairing fails if the dongle driver is not installed 

on the computer. 

2

  Pairing fails if the LED indicator on the dongle 

is not red.

3

 

Remove the dongle from the PC, reinsert it and 
try pairing.

1

  Press the 

 

Home button on the touch pen 

and check that the red LED blinks once.

2

 

Press the

 

 

Home 

button and the  (Pow-

er) button together, regardless of sequence, for 
more than 4 seconds.

3

 

If you release the buttons after 4 seconds, the 
pen will be reset. The red LED will blink three 
times and the pen will be turned off.

When Pairing Fails

Caution When Unpairing

1

  Be careful not to unpair the pen by mistake. If 

unpaired, try pairing it again.

2

  If you unpair and pair a normally functioning 

touch pen, the other paired pen may not work. 
In this case, unpair the nonfunctioning touch 
pen and pair it again by following the steps de-
scribed in the Pairing for the First Time section.

Touch pen

 Operation

Once paired, you can use the touch pen in the 
following ways.

1

  Powering on

- 

Press the   

(Power)

 button once. The red 

and green LEDs will remain lit to indicate that 
the power is on.

2

 

Powering off

-

 Press the  (Power) button for more than 3 

seconds and release it. The red LED will blink 
3 times and the pen will be turned off.

3

  Pressing the 

 

Home button while using 

the touch pen
-  In the Pentouch 

program

: 

Shows or hides 

the toolbar of the feature.

-  In Windows: Works in the same way as the 

right-click function.  
Point the touch pen at an object you want to 
right-click, then press the button.

4

  The double-click function may not work as 

intended in Windows XP or Windows Vista. 
If this is the case, use the 

 

Home button 

(right-click) instead.

5

  The touch pen works in the same way as the 

mouse in Windows.

Pairing for the First Time

1

 

Check that the LED indicator on the dongle 
connected to the computer is red.

2

  Keep the touch pen within 30 cm of the dongle.

3

  Press the 

button on the touch pen 

once.

4

  The LED indicator on the touch pen will red for 

2 seconds and blinks green 3 times when pair-
ing is complete.

5

  If the LED indicator is red for 4 ~ 5 seconds 

and blinks red 3 times, pairing is not success-
ful. Please try pairing again.

6

  Once a pen is paired, the red LED blinks once 

when you press the 

 

Home button.