LG W110 ユーザーズマニュアル
22
Charging terminals
Heart rate sensor
Warning
Do not close or push the hole with anything sharp. Doing so may cause your device to
work improperly.
work improperly.
Charging Cradle
Charger/USB Port
Charging Terminals
Wearing the G Watch R
Your G Watch R has undergone testing in a controlled environment and is proven to be water and dust resistant
in certain circumstances (meets the requirements of classification IP67 as described by the international
standard IEC 60529 - Degrees of Protection provided by Enclosures [IP Code]; test conditions: 15°C/59 °F ~ 35
°C/95°F, 86 - 106 kPa, 1 meter (approximately 3 feet), for 30 minutes). Despite this classification, your device is
not fully resistant to water damage.
in certain circumstances (meets the requirements of classification IP67 as described by the international
standard IEC 60529 - Degrees of Protection provided by Enclosures [IP Code]; test conditions: 15°C/59 °F ~ 35
°C/95°F, 86 - 106 kPa, 1 meter (approximately 3 feet), for 30 minutes). Despite this classification, your device is
not fully resistant to water damage.
•
The G Watch R must not be immersed in water deeper than 3 feet (approximately 1 meter) and kept
submerged for longer than 30 minutes.
submerged for longer than 30 minutes.
•
The device must not be exposed to water at high pressure, such as ocean waves or a waterfall.
•
Should your G Watch R or your hands become wet, dry them thoroughly before handling the device.
•
The device must not be exposed to salt water, ionised water or soapy water.
•
The G Watch R's water and dust resistant features may be damaged by dropping or receiving an impact.
•
If the G Watch R gets wet, use a clean, soft cloth to dry it thoroughly.
•
The touch screen and other features may not work properly if the device is used in water or any other
liquid.
liquid.
•
If the G Watch R has been immersed in water or if the microphone or speaker has gotten wet, in-call
sound quality may be affected. Wipe the microphone or speaker with a dry cloth to ensure it is clean and dry.
sound quality may be affected. Wipe the microphone or speaker with a dry cloth to ensure it is clean and dry.