Juniper 1-Port SFP Mini-PIM SRX-MP-1SFP ユーザーズマニュアル
製品コード
SRX-MP-1SFP
The 2-Port 10 Gigabit Ethernet XPIM contains two 10 Gigabit Ethernet interfaces with
both copper and small form-factor pluggable plus transceiver (SFP+) terminations, to
support redundancy and enable the services gateway ateway to be used as a pure security
service device. The 2-Port 10 Gigabit Ethernet XPIM also provides effective MPLS/GRE
termination of customer traffic with reasonable performance.
both copper and small form-factor pluggable plus transceiver (SFP+) terminations, to
support redundancy and enable the services gateway ateway to be used as a pure security
service device. The 2-Port 10 Gigabit Ethernet XPIM also provides effective MPLS/GRE
termination of customer traffic with reasonable performance.
NOTE:
Only SRX650 Services Gateway supports hot-swappable functionality
for GPIMs.
shows the 2-Port 10 Gigabit Ethernet XPIM.
Figure 27: 2-Port 10 Gigabit Ethernet XPIM
g032740
Related
Documentation
•
•
•
•
•
•
2-Port 10 Gigabit Ethernet XPIM Key Features
The 2-Port 10 Gigabit Ethernet XPIM supports the following key features:
•
Contains a total of four ports:
•
Two SFP+ fiber ports
•
Two 10 G Base-T copper ports
Only two of the four ports can be active at the same time (one from port group 0 and
one from port group 1). Mixing and matching between the copper and fiber port types
is supported.
one from port group 1). Mixing and matching between the copper and fiber port types
is supported.
•
Receives SFP+ optics and, at a minimum, supports these SFP+ transceivers:
•
SFPP-10GE-SR
•
SFPP-10GE-LR
•
SFPP-10GE-ER
•
SFPP-10GE-LRM
•
Copper Twin-AX 1m
Copyright © 2012, Juniper Networks, Inc.
110
SRX Series Services Gateways for the Branch Physical Interface Modules Hardware Guide