Juniper 1-Port SFP Mini-PIM SRX-MP-1SFP ユーザーズマニュアル
製品コード
SRX-MP-1SFP
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module LEDs
The 1-Port Gigabit Ethernet Small Form-Factor Pluggable Mini-Physical Interface Module
(SFP Mini-PIM) has two LEDs located to the right of the socket.
(SFP Mini-PIM) has two LEDs located to the right of the socket.
describes the LED states.
Table 23: 1-Port Gigabit Ethernet SFP Mini-PIM LED States
Description
State
Color
LED
Port is online
On
Green
LINK
Port is offline
Off
Port is receiving or sending data
Blinking
Green
ACT
Port might be on but is not receiving or
sending data
sending data
Off
Related
Documentation
•
•
•
•
•
•
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Basic Configuration
To enable the 1-Port Gigabit Ethernet Small Form-Factor Pluggable Mini-Physical Interface
Module (SFP Mini-PIM) installed on the SRX Series Services Gateway, you must configure
the properties. You can perform the same configuration tasks using either the J-Web
interface or the CLI. In addition, you can configure a variety of other options that are not
encountered frequently.
Module (SFP Mini-PIM) installed on the SRX Series Services Gateway, you must configure
the properties. You can perform the same configuration tasks using either the J-Web
interface or the CLI. In addition, you can configure a variety of other options that are not
encountered frequently.
•
•
Copyright © 2012, Juniper Networks, Inc.
54
SRX Series Services Gateways for the Branch Physical Interface Modules Hardware Guide