Juniper 1-Port SFP Mini-PIM SRX-MP-1SFP ユーザーズマニュアル
製品コード
SRX-MP-1SFP
Using the CLI
To perform basic configuration for the 1-Port G.SHDSL 8-Wire Mini-PIM and to configure
network interfaces for the services gateway with the CLI:
network interfaces for the services gateway with the CLI:
•
Verify that the G.SHDSL interface is installed on the device:
show chassis hardware
•
Verify the status of the interface:
show interfaces terse
•
Assign the port an IP address:
set interfaces at-1/0/0 unit 0 family inet address Interface address/destination prefix
•
Add or select a security zone; for example, Trust:
set security zones security-zone trust interfaces at-1/0/0.0 host-inbound-traffic
system-services all
•
Add or select security zones for host inbound traffic options protocols:
set security zones security-zone trust interfaces at-1/0/0.0 host-inbound-traffic protocols
all
•
Set security policies:
set security policies default-policy permit-all
See the
for more details.
65
Copyright © 2012, Juniper Networks, Inc.
Chapter 6: 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module