Juniper 1-Port SFP Mini-PIM SRX-MP-1SFP ユーザーズマニュアル
製品コード
SRX-MP-1SFP
Table 32: 1-Port SFP Mini-Physical Interface Modules (continued)
Connector
Interface Type
Product Number
LC
1000BASE-BX, at 40 km (TX1550
nm / RX1310 nm)
nm / RX1310 nm)
SFP-GE40KT15R13
LC
100Base-BX Fast Ethernet Optics,
at 20 km (TX 1310 nm / RX 1550
nm)
at 20 km (TX 1310 nm / RX 1550
nm)
EX-SFP-FE20KT13R15
LC
100Base-BX Fast Ethernet Optics,
at 20 km (TX 1550 nm / RX 1310
nm)
at 20 km (TX 1550 nm / RX 1310
nm)
EX-SFP-FE20KT15R13
NOTE:
We strongly recommend the use of Juniper Networks SFP and XFP
transceivers. We cannot guarantee correct operation if other transceivers are
used. The transceiver type can be different in each port, as long as a supported
part number is used.
used. The transceiver type can be different in each port, as long as a supported
part number is used.
Related
Documentation
•
•
•
•
•
•
1-Port SFP Mini-Physical Interface Module Key Features
The 1-Port Small Form-Factor Pluggable Mini-Physical Interface Module (SFP Mini-PIM)
has the following key features:
has the following key features:
•
Enables you to install and remove transceivers without powering down the device
•
Provides real-time visual status of connectivity and traffic flows
•
Provides Link Up/Down alarm
•
Supports the following transceiver types:
•
1000BASE-SX
•
100BASE-LX
•
1000BASE-LX10
•
100BASE-FX
•
1000BASE-T
Copyright © 2012, Juniper Networks, Inc.
76
SRX Series Services Gateways for the Branch Physical Interface Modules Hardware Guide