Cisco 2-port E&M voice/fax VIC3-2E/M= データシート
製品コード
VIC3-2E/M=
Data Sheet
© 2009-2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 12
Figure 2. IP Telephony Application using NM-HDV-2T1/E1 (with a VIC3-4FXS/DID), and SRST in a Full-Service Branch
Table 2.
Cisco IP Communications High-Density Digital Voice/Fax Network Module
Module
Description
Application
NM-HDV2
IP Communications High-Density Digital
Voice/fax Network Module
Voice/fax Network Module
Supports a VIC/VWIC slot that can fitted with either digital or analog/BRI
voice/WAN interface cards. Supports a maximum of 60 channels of digital
voice, or four channels of analog voice in medium complexity codec. Up to four
PVDM2 Packet Fax/Voice DSP modules can be used.
voice/WAN interface cards. Supports a maximum of 60 channels of digital
voice, or four channels of analog voice in medium complexity codec. Up to four
PVDM2 Packet Fax/Voice DSP modules can be used.
NM-HDV2-1T1/E1
IP Communications High-Density Digital
Voice/fax Network Module with one Built-in
T1/E1 port
Voice/fax Network Module with one Built-in
T1/E1 port
Includes a built-in T1/E1 port and a VIC/VWIC slot that can be fitted with either
digital or analog/BRI voice/WAN interface cards. Supports a maximum of 90
channels of digital voice, or 30 channels of digital voice and four channels of
analog voice in medium complexity codec. Up to four PVDM2 Packet Fax/Voice
DSP modules can be used.
digital or analog/BRI voice/WAN interface cards. Supports a maximum of 90
channels of digital voice, or 30 channels of digital voice and four channels of
analog voice in medium complexity codec. Up to four PVDM2 Packet Fax/Voice
DSP modules can be used.
NM-HDV2-2T1/E1
IP Communications High-Density Digital
Voice/fax Network Module with two Built-in
T1/E1 ports
Voice/fax Network Module with two Built-in
T1/E1 ports
Includes two built-in T1/E1 ports and a VIC/VWIC slot that can be fitted with
either digital or analog/BRI voice/WAN interface cards. Supports a maximum of
120 channels of digital voice, or 60 channels of digital voice and four channels
of analog voice in medium complexity codec. Up to four PVDM2 Packet
Fax/Voice DSP modules can be used.
either digital or analog/BRI voice/WAN interface cards. Supports a maximum of
120 channels of digital voice, or 60 channels of digital voice and four channels
of analog voice in medium complexity codec. Up to four PVDM2 Packet
Fax/Voice DSP modules can be used.