LG M3703CCBA ユーザーズマニュアル

35

Note

*  Vertical frequency: To enable the user to watch the product display, screen image should be changed tens of times 

every second like a fluorescent lamp. The vertical frequency or refresh rate is the times of image display per second. 

The unit is Hz.

*  Horizontal frequency: The horizontal interval is the time to display one vertical line. When 1 is divided by the 

horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal 

frequency. The unit is kHz.

•  See if the power cord is properly connected to the 

outlet.

•  See if the power switch is turned on.

•  May need service.
•  Adjust brightness and contrast again.

•  Backlight may need repair.
•  If the product is in power saving mode, move the 

mouse or press any key.

• Turn both devices off and then back on.
•   The signal from the PC (video card) is out of the 

vertical or horizontal frequency range of the 

product. Adjust the frequency range by referring 

to the Specifications in this manual.

RGB : 1600 x 1200 @60Hz

HDMI/DVI : 1920 x 1080 @60Hz

•   The signal cable between PC and product is not 

connected. Check the signal cable.

•   Press the 'INPUT' menu in the remote Control to 

check the input signal.

•  The control locking function prevents unintentional 

OSD setting change due to careless usage. To unlock 

the controls, simultaneously press the Menu button 

and     button for several seconds. (You cannot set 

this function using the remote control buttons. You can 

set this function in the product only.)

●  

•  Install the product driver, which is provided with 

the product, or download it from the web site. 

(http://www.lge.com) 

•   See if the plug&play function is supported by 

referring to the video card user manual.

● 

● 

● 

● 

● 

●  

●