Addonics RT55SNHX プリント

  

INTRODUCTION

 

 

 

 

 

 

www.addonics.com

Addonics Technologies Inc.

1918 Junction Avenue, San Jose, CA 95131

Phone: 408.573.8580 | Fax: 408.573.8588

    

The RAID Tower V is based on the Storage Tower platform that features five 5.25" drive bays in a lightweight and compact chassis with 

a stylish and functional front bezel. Depending on the model, up to eight 3.5" hard drives can be installed into the RAID Tower V. The 

drives can be configured into a RAID set and connect to the computer via a single USB 3.0, USB 2.0 or high speed eSATA connection. 

Each model comes with everything you need to connect it to your computer. All you need to do is provide your own hard drives and 

configure the RAID via a simple on board rotary switch or software utility (depending on the model of the RAID Tower.)   

Connect to system via eSATA port 

(connecting cable included).

Install up to five 3.5" SATA hard 

drives of any capacity (drives not 

included).

Drives are added or removed like 

tape cartridge from each drive bay 

with no special tool required.

Drives can be configured as 

RAID0 (Striping), RAID1 

(Mirroring), RAID5 (Parity), 

RAID10 (Mirrored Striped), JBOD* 

(Concatenation), Clone Mode 

(N-Way Mirror) using built-in 

hardware RAID.

OS independent, can be used on 

any system when all drives are 

configured as a single RAID 

volume.

For Windows operating systems, 

confiure RAID using RAID 

diagnostic software utility.

For Linux and Mac operating 

systems, configure RAID using 

onboard jumpers.

Connect to system via superspeed 

USB 3.0 or eSATA port 

(connecting cable included).

Install up to five 3.5" SATA hard 

drives of any capacity (drives not 

included).

Drives are added or removed like 

tape cartridge from each drive bay 

with no special tool required.

Drives can be configured as 

RAID0 (Striping), RAID1 

(Mirroring), RAID5 (Parity), 

RAID10 (Mirrored Striped), JBOD* 

(Concatenation), Clone Mode 

(N-Way Mirror) using built-in 

hardware RAID.

OS independent, can be used on 

any system when all drives are 

configured as a single RAID 

volume.

For Windows operating systems, 

confiure RAID using RAID 

diagnostic software utility.

For Linux and Mac operating 

systems, configure RAID using 

onboard jumpers

Connect to system via two USB 

2.0 or two eSATA ports 

(connecting cables included).

Install up to eight 3.5" SATA hard 

drives of any capacity (drives not 

included).

3.5" SATA Drives are added or 

removed via a removable drive 

tray like a tape cartridge

Drives can be configured in two 

4-drive RAID groups. Each RAID 

group can be configured as FAST2 

(2 drive RAID 0 Striping),, SAFE2 

(RAID1 Mirroring), SAFE FAST 

(RAID 1+0 Mirrored Stripped), BIG 

2 (2 drives Concatenation), FAST4 

(4 drive RAID 0 Striping), BIG 4(4 

drives Concatenation), RAID 1+0, 

RAID 5 over 4 drives, or RAID 

5+S.

RAID setting via a rotary switch on 

the back.

OS independent, can be used on 

any system.

RAID diagnostic via LED lights.

Connect to system via USB 2.0 or 

eSATA port (connecting cables 

included).

Install up to four 3.5" SATA hard 

drives of any capacity (drives not 

included).

Install up to four 2.5" SATA hard 

drives of any capacity (drives not 

included).

3.5" SATA Drives are added or 

removed like tape cartridge from 

each drive bay with no special tool 

required.

2.5" SATA Drives are installed onto 

drive trays that can be added or 

removed like tape cartridge from 

each drive bay.

Drives can be configured in two 

4-drive RAID groups. Each RAID 

group can be configured as FAST2 

(2 drive RAID 0 Striping),, SAFE2 

(RAID1 Mirroring), SAFE FAST 

(RAID 1+0 Mirrored Stripped), BIG 

2 (2 drives Concatenation), FAST4 

(4 drive RAID 0 Striping), BIG 4(4 

drives Concatenation), RAID 1+0, 

RAID 5 over 4 drives, or RAID 

5+S.

RAID setting via a rotary switch on 

the back.

OS independent, can be used on 

any system.

RAID diagnostic via LED lights.

 

RAID TOWER V BASIC SPECIFICATIONS

*supported only with eSATA connection to PM

compatible controller.