Bixolon SLP-D420DG ユーザーズマニュアル
Rev. 1.03
- 11 -
SLP-D42**
3-2 Interface Cable Connection
Connect the interface cable as shown below.
This printer supports the following communications interface standards.
Connect the interface cable as shown below.
This printer supports the following communications interface standards.
-
RS-232C
(Serial)
-
IEEE1284
(Parallel)
-
USB
-
Ethernet
(exclusively
for SLP-D420E, D423E)
1) Turn off the power switch.
2) Connect the communication cable to the printer communication port.
- For a Serial cable, secure by tightening the screws on both sides.
- For a Parallel cable, secure by fastening the clips on both sides.
- Connect USB cable when using USB interface.
- Connect LAN cable when using Ethernet interface.
- Connect LAN cable when using Ethernet interface.
USB Cable
RS-232 (Serial) Cable
IEEE1284 (Parallel) Cable
or LAN (Ethernet ) Cable