LG 8801031531714 ユーザーズマニュアル

28

T RO U B L E S H O OT I N G

• Water supply taps are not  

open fully.

• Water line hoses are kinked, 

pinched, or bent.

• Water inlet filters are clogged. 

• Water pressure to tap or 

house is too low.

• Power cord is not properly 

plugged in. 

• House fuse is blown, circuit 

breaker has tripped, or power 

outage has occurred.

• The lid is not closed properly.

•  Water level is too high due to 

a faulty water valve.

• Make sure that the water taps are open fully. 

• Make sure the hoses are not kinked or pinched. Be 

careful when moving the washer.

• Clean the inlet filters. See the 

Care and Cleaning 

section.

• Check another faucet in the house to make sure that 

household water pressure is adequate.

•  Make sure that the plug is plugged securely into a 

grounded, 3-prong, 120-VAC, 60-Hz. outlet.

• Reset circuit breaker or replace fuse. Do not increase 

fuse capacity. If the problem is a circuit overload, 

have it corrected by a qualified electrician.

• Make sure that the lid is closed properly and press 

the START/PAUSE button. After starting a cycle, it 

may take a few moments before the drum begins to 

turn or spin. The washer will not spin unless the lid is 

locked (LID LOCK will appear in the display). 

• If the lid is closed and locked and the open lid error 

message is displayed, call for service.

• If you press the START button while the lid is open, 

dE error message will be displayed.

• The washer automatically 

adjusts the wash time for 

the amount of laundry, water 

pressure, water temperature, 

and other operating 

conditions.

• This is normal. The washer adjusts cycle time 

automatically to provide optimal results for the 

selected cycle. 

• If you press the START button while the lid is open, 

dE error message will be displayed.

• Close the water taps, unplug the washer, and call for 

service.

•Lid lock switch error

• Make sure that the lid is closed properly and press 

the START/PAUSE button. The washer will not spin 

unless the lid is locked (LID LOCK will appear in the 

display).

• If the lid is closed and the lid lock error message is 

displayed, call for service.

• Drain hose is bent, pinched, 

or clogged.

• Make sure the drain hose is free of clogs, kinks, etc., 

and is not pinched behind or under the washer.

• Clutch error

• Unplug the washer, and call for service.