LG NP8740 ユーザーガイド
Operating
53
Oper
ating
3
1. Plug the speaker into an electrical outlet.
Press 1/!/
F
button on the speaker to select
bluetooth mode. Then
Bluetooth status LED
starts to blink with white.
2. Operate the Bluetooth device and perform
the pairing operation. When searching for this
speaker on your Bluetooth device, a list of the
devices found may appear in the Bluetooth
device display depending on the type of
Bluetooth device. Your speaker appears as
“Music Flow H5 (or H7) (XX:XX)”.
speaker on your Bluetooth device, a list of the
devices found may appear in the Bluetooth
device display depending on the type of
Bluetooth device. Your speaker appears as
“Music Flow H5 (or H7) (XX:XX)”.
3. Select the “Music Flow H5 (or H7) (XX:XX)”.
XX:XX means the last four digits of BT address.
For example, if your speaker has a BT address
such as 9C:02:98:4A:F7:08, you will see “Music
Flow H5 (or H7) (F7:08)” on your Bluetooth
device.
For example, if your speaker has a BT address
such as 9C:02:98:4A:F7:08, you will see “Music
Flow H5 (or H7) (F7:08)” on your Bluetooth
device.
,
Note
4. When this speaker is successfully connected
with your Bluetooth device, the Bluetooth
status LED stops blinking.
status LED stops blinking.
y Depending on the type of the Bluetooth
device, some devices have a different
pairing way.
pairing way.
y Try pairing procedure if your device name is
not in the device list.
,
Note
5. Listen to music.
To play music in your Bluetooth device, refer to
your Bluetooth device’s user guide.
your Bluetooth device’s user guide.
According to your Bluetooth device’s volume
level, the volume level of Bluetooth will be
adjusted.
level, the volume level of Bluetooth will be
adjusted.
y When using
Bluetooth®
technology, you
have to make a connection between the
unit and the bluetooth device as close as
possible and keep the distance.
However it may not work well in the case
below :
unit and the bluetooth device as close as
possible and keep the distance.
However it may not work well in the case
below :
- There is a obstacle between the unit and
the bluetooth device.
- There is a device using same frequency
with Bluetooth® technology such as a
medical equipment, a microwave or a
wireless LAN device.
medical equipment, a microwave or a
wireless LAN device.
y This unit supports Bluetooth auto pairing.
However it does not operate in the case
below:
below:
- When you restart this unit.
- When you disconnect this unit by yourself.
- When you disconnect this unit on the
connected Bluetooth device.
y The sound may be interrupted when the
connection is interfered with by the some
other electronic wave.
other electronic wave.
y You cannot control the Bluetooth device
with this unit.
y Pairing is limited to “One” Bluetooth® device.
Multi-Pairing is not supported.
y Depending on the type of the device,
you may not be able to use the Bluetooth
function.
function.
y You can enjoy using Bluetooth® when using
Phone, MP3, Notebook, etc..
y The more distance between the unit and
the bluetooth device, the lower the sound
quality becomes.
quality becomes.
y The Bluetooth® connection will be
disconnected when the unit is turned off or
the Bluetooth® device gets too far from the
unit.
the Bluetooth® device gets too far from the
unit.
y If the Bluetooth® connection is
disconnected, connect the Bluetooth®
device again.
device again.
,
Note