Omnitron miConverter Gx 1203-1-6 ユーザーズマニュアル

TM



 

Miniature Gigabit Ethernet media converter 



   Supports 1000BASE-T, 1000BASE-X and the 

IEEE 802.3 specification



  Plug-and-Play capability



  USB power via optional Power Adapter Cable



  Supports Full/Half-Duplex fiber optic auto-negotiation



  Multimode and single-mode fiber options



   LED indicators for UTP and fiber status



  Domestic, Universal and 

Country/Region specific

 power 

supply options



  Wall-mount with optional mounting brackets or an 

18-Module Powered Chassis  



  Small and lightweight (5 ounces)



  Cost-effective



Lifetime Warranty and free 24/7 Technical Support

The miConverter Gx is a miniature 1000BASE-T UTP copper 

to 1000BASE-X fiber Gigabit Ethernet media converter. The

miConverter Gx provides cost-effective fiber connectivity from

Gigabit switches to diagnostic equipment, desktop and laptop 

computers.
The  miConverter  Gx  is  the  first  Gigabit  media  converter 

powered by a USB port (1.0, 1.1, and 2.0).  An optional USB 

Power Adaptor Cable is available, which reduces the module’s 

weight and eliminates the need to tether the miConverter Gx

to an electrical outlet.  
The Plug-and-Play capability of the miConverter Gx simplifies

fiber-to-the-laptop  and  fiber-to-the-desktop  deployments.  

The miConverter Gx features auto-negotiation, which allows 

connected network devices to auto-negotiate their Duplex and 

Pause  modes.   The  miConverter

  Gx  also  provides  manual 

configuration with built-in DIP-switches for compatibility with

legacy  Gigabit  fiber  products.   These  features  ensure  the

miConverter Gx is compatible with the widest range of Gigabit 

fiber equipment.
The  miConverter  Gx

  is  available  in  multimode  dual  fiber,

single-mode dual fiber and single-mode single-fiber options.

It supports SC and ST connectors with fiber link distances up

to 550m over MM fiber, 80km over SM fiber and 40km over

single-fiber.
The miConverter Gx supports industry standard wavelengths 

depending on the fiber type. For multimode dual fiber, the

miConverter Gx uses 850nm (Sx).  When using single-mode 

dual fiber models with distances of up to 34km, the miConverter 

Gx  uses  1310nm  (Lx).    For  distances  of  up  to  80km,  the 

miConverter Gx uses 1550nm (Zx). 
Single-mode  single-fiber  miConverter  Gx

  models  use  

1310nmTx/1550nmRx  and  1550nmTx/1310nmRx  wave 

division multiplexing.  The SF converters must be used in pairs 

where the transmit (Tx) wavelength of one converter matches 

the receive (Rx) wavelength of the other. 
The LED indicators provide diagnostic data such as availability 

of power, port activity, link status, and Duplex modes to assist 

in network installation and maintenance.
The miConverter Gx combines Gigabit Ethernet connectivity 

with  the  lightweight  design  and  low-power  consumption 

required for both permanent deployment and mobile service 

networks.

Shown with optional wall mount bracket