LG LD-1481W4 オーナーマニュアル

For effective washing performance, adjust the setting corresponding to the hardness level of water 

used in water supply. The water softener has 8 adjustment levels, and the dishwasher is programmed 

at the factory for a water hardness level of H00. You can check the default setting value and adjust it 

in the following manner:

1.   Press Half Load 

and Power button 

simultaneously. 

(Current setting value 

indicated.)

2.  Press the Half Load 

button, and then set 

up your intended 

value. 

(Scope of setting 

value : H00~H07)

3.  Press the Delay Start 

button for saving the 

setting.  

(The power turns off 

upon the saving.)

* The display may vary, depending on the model.

•   The ‘Salt Filling’ light turns on in the display if salt is not in the softening system.

• If the hardness setting is set to H0, no light turns on in case of no salt.