LG LD-1481W4 オーナーマニュアル

Lower Spray Arm

Water Inlet Hose

USER MAINTENANCE & CLEANING INSTRUCTIONS

To maintain performance and prevent malfunctions, it is important to check the inside

of the dishwasher, including filters and nozzles, at regular intervals.

Before cleaning the spray arms, remove the lower

rack from the dishwasher.

1. Check whether the holes of the lower

spray arms are blocked.

2. Remove the lower spray arm by pulling it

up with two hands.

3. Apply the same cleaning method as the

upper spray arm to clean any blocked

holes.

4. After cleaning, refit the lower spray arm

back into its position by pushing it down

firmly.

1. Turn off the water supply. Disconnect the

water supply hose from the dishwasher.

2. Remove the filter with a long nose plier.
3. Clean the filter in the supply hose under

running water.

4. Reconnect the water supply hose to the

tap.

(Securely fasten them to prevent water

leak)

<Normal>

<Abnormal>

• Excessive force for removing the lower

nozzle may cause damage to the

dishwasher or physical injury to hands

by hitting the upper rack. So, slowly

remove and refit it with two hands at all

times.

! Check point

• If regional water contains a lot of foreign substances (small grains of sand), the water

supply flow into the unit may be obstructed as the inlet hose filter may become blocked. To

prevent this from occurring, clean it on a regular basis.

NOTE