LG LD-1481W4 オーナーマニュアル

  Only use this feature when instructed to do so by the call centre.  

The transmission sounds similar to a fax machine, and so has no meaning except to the call centre.

  SMARTDIAGNOSIS™ can not be activated if the dishwasher does not power up.  

If this happens, then troubleshooting must be done without SMARTDIAGNOSIS™.

If you experience problems with your dishwasher, call the Customer information centre. 

Follow the call centre agent's instructions, and do the following steps when requested:

1.  Press the Power button to turn on the dishwasher. 

Do not press any other buttons.

2.   When instructed to do so by the call centre, place the 

mouthpiece of your phone very close to the Power button. 

(Max. 10mm)

4.   Keep the phone in place until the tone transmission has finished.  

This takes about 6 seconds, and the display will count down the time.

• For best results, do not move the phone while the tones are being transmitted.

•  If the call centre agent is not able to get an accurate recording of the data, you may be asked 

to try again.

•  Pressing the Power button during the transmission will shut off the SMARTDIAGNOSIS™.

5.   Once the countdown is over and the tones have stopped, the machine will display END and 

turn off automatically after a few seconds. 

Resume your conversation with the call centre agent, who will then be able to assist you using 

the information transmitted for analysis during the call to Customer information centre.

NOTE

SMARTDIAGNOSIS  function is available only for the products with a SMARTDIAGNOSIS  mark.

If using a mobile phone with poor signal, the smart diagnosis function might not operate.

3.   Press and hold the Dual Intensity and Auto buttons for 

three seconds, while holding the phone mouthpiece to 

the icon or Power button.

■

  

Smart Diagnosis is a troubleshooting feature designed to assist, not replace, the traditional 

method of troubleshooting through service calls. The effectiveness of this feature depends upon 

various factors, including, but not limited to, the reception of the cellular phone being used for 

transmission, any external noise that may be present during the transmission, and the acoustics 

of the room where the machine is located. Accordingly, LG does not guarantee that Smart 

Diagnosis would accurately troubleshoot any given issue.