LG 47LW5700 オーナーマニュアル

ページ / 184
28
ENG
ENGLISH
ASSEMBLING AND PREPARING
4
  Connect the 
Display Link Cable (for wall 
mounting bracket; the longer one) to the 
display link input on the back of the TV. Then, 
mount the TV set on the wall in direction of the 
arrow as shown in the figure.
5
  Secure the set with the 
Wall Mounting 
Bracket Pushpins.
6
  Place the 
Stand Base in a proper location and 
connect it with the 
Display Link Cable.
Wall Mounting 
Bracket Pushpin
y
y
 Check the material of the wall and thickness 
of finishing material. 
y
y
 You can use the anchors and screws pro-
vided with the TV set for the wall made with 
concrete, lightweight concrete, soft field-
stone, hard fieldstone, brick or cellular block.
y
y
 Do not mount on the wall made with plaster 
board or medium density fibreboard (MDF). 
In this case, the anchor and screws must be 
inserted in the concrete inside of finishing 
material. If there is no concrete inside, you 
must install a separate hanger first and fix 
the anchors and screws.
y
y
 For other cases, make sure that each fixed 
part can resist the pull-out load of 70 kgf 
(686 N) and shear load of 100 kgf.
NOTE
Tidying cables
Only 32/37/42/47/55LV37**,32/37/42/47/55
LV55**, 42/47/55LW57**, 42/47/55/65LW65**, 
47/55LW77**, 47/55LW95**
1
  Gather and bind the cables with the 
Cable 
Holder on the TV back cover. 
Only 47/55LZ96**
1
  Secure the power cord with the 
Cable Holder 
on the TV back cover. It will help prevent the 
power cable from being removed by accident.
Cable Holder
2
  After connecting the cables as necessary, 
install 
Cable Holder as shown and bundle the 
cables.
Cable Holder
Cable Holder