Viewsonic PJD5234L ユーザーズマニュアル

10

The capability of operating your computer with the remote control gives you more 
flexibility when delivering presentations. 

1.

Connect the projector to your PC or notebook with a USB cable prior to using the 
remote control in place of your computer’s mouse. See 

"Connecting a computer" on 

page 16

 for details.

2.

Set the input signal to D-Sub / Comp. 1, D-Sub / Comp. 2 or HDMI.

3.

Press Mouse on the remote control to switch from the normal mode to the mouse 
mode. An icon appears on the screen to indicate the activation of the mouse mode.

4.

Perform the desired mouse controls on your remote control.

•

To move the cursor on the screen, press 

/

/

/

. 

•

To left-click, press 

. 

•

To right-click, press  . 

•

To operate your display software program (on a connected PC) which responds to 
page up/down commands (like Microsoft PowerPoint), press PgUp/PgDn.

•

To return to the normal mode, press Mouse again or other keys except for the 
mouse related multi-function keys.

The Infra-Red (IR) remote control is located on the front 
of the projector. The remote control must be held at an 
angle within 30 degrees perpendicular to the projector's 
IR remote control sensor to function correctly. The 
distance between the remote control and the sensor should 
not exceed 8 meters (~ 26 feet).

Make sure that there are no obstacles between the remote 
control and the IR sensor on the projector that might 
obstruct the infra-red beam.

Approx

. 15°