Viewsonic CDP4260-TL ユーザーズマニュアル
3
1.5. Installing and Removing OPS module (CDP4260-TL/CDP5560-TL series) (optional)
To install OPS Module:
1. Power off the display.
2. Remove the cover of OPS after take screw off.
3. ,QVHUW236PRGXOHDQGWKHQ¿[E\VFUHZ
NOTE: Keep the OPS cover for future use.
1. Power off the display.
2. Remove the cover of OPS after take screw off.
3. ,QVHUW236PRGXOHDQGWKHQ¿[E\VFUHZ
NOTE: Keep the OPS cover for future use.
Screw
Screw
OPS
To remove OPS Module:
1. Power off the display.
2. Remove screw and plug out OPS module.
3. ,QVWDOO236FRYHUDQGWKHQ¿[E\VFUHZ
1. Power off the display.
2. Remove screw and plug out OPS module.
3. ,QVWDOO236FRYHUDQGWKHQ¿[E\VFUHZ
1.6. Mounting on a Wall
To mount this display to a wall, you will have to obtain a standard wall-mounting kit (commercially available).
We recommend using a mounting interface that complies with TUV-GS and/or UL1678 standard in North
America.
We recommend using a mounting interface that complies with TUV-GS and/or UL1678 standard in North
America.
Protective Sheet
VESA Grid
For Tabletop stand
Table