Omnitron FlexPoint OC3FF 4451-1 プリント

TM

The  FlexPoint  OC3FF  is  a  protocol-independent  fiber 

converter that provides reliable and cost-effective extension 

of network distances by connecting multimode fiber networks 

or devices over single-mode fiber cabling.

No manual configuration is required with the plug-and-play 

FlexPoint OC3FF. Connect the fiber cables to the appropriate 

interface and the installation is complete.

The FlexPoint OC3FF is designed to operate with a constant 

rate signal between 1Mbps to 155Mbps allowing the converter 

to be used in ATM networks as well as other fiber-to-fiber 

protocol applications.

The fiber port operates at 850nm, 1310nm or 1550nm and 

features  SC  or    ST  connectors.  Multimode  fiber  models 

support distances of up to 5km, single-mode fiber models 

support distances of up to 120km, and single-mode single 

fiber models support distances up to 20km.

The  FlexPoint  OC3FF  features  descriptions  of  the  LED 

indicators on the label for easy in-the-field installation and 

maintenance. The LEDs report the availability of power and 

the detection of devices attached to the fiber ports.

FlexPoint modules can be mounted utilizing optional wall-

mounting hardware or with DIN-rail mounting brackets. They 

can also be rack-mounted in a 5-Module shelf or in a high-

density 14-Module, power-redundant Powered Chassis. 

FlexPoint modules installed in the 5-Module shelf or used 

as standalone devices can be powered by an external AC to 

DC power adapter, or through the 5VDC chassis connector.  

Standalone modules can also be powered by attaching an 

external DC power supply (18-60VDC).  When used in the 

14-Module  power-redundant  Powered  Chassis  with  any 

combination  of AC  and  DC  power  supplies,  the  installed 

modules are powered via the 5VDC chassis connector.

The wide variety of FlexPoint mounting and power options 

provide  flexible  upgrade  paths  as  network  requirements 

change and grow. 

FlexPoint  unmanaged  media  converters  are  easy  to  use 

and provide dependable fiber connectivity in Enterprise and 

Government networks around the world.

The FlexPoint OC3FF single-mode to multimode  

 

■

protocol-independent fiber converter

Supports all OC-3 standards over ATM and SONET

 

■

Plug-and-play installation requires no manual 

 

■

configuration

Operates with a constant rate signal from 1M to 

 

■

155Mbps

Supports auto-negotiation of duplex mode

 

■

Extends network distances up to 120km

 

■

Supports most network interfaces with a variety of cable 

 

■

and connector types

Labeled status LEDs for quick and easy installation

 

■

Wall-mount or rack-mount on a 5-Module shelf or in 

 

■

a 14-Module power-redundant FlexPoint Powered 

Chassis

Completely software independent with no installation of 

 

■

drivers required

Peace-of mind reliability backed by a lifetime warranty 

 

■

and free 24/7 technical support