Viewsonic PJD5555LW ユーザーズマニュアル

10

The capability of operating your computer with the remote control gives you more 
flexibility when delivering presentations.

1. Connect the projector to your PC or notebook with a USB cable prior to using the 

remote control in place of your computer’s mouse. See 

 for details.

2. Set the input signal to COMPUTER.
3. Press Mouse on the remote control to switch from the normal mode to the mouse

mode. An icon appears on the screen to indicate the activation of the mouse
mode.

4. Perform the desired mouse controls on your remote control.

• To move the cursor on the 

screen, 

press / / /  

.

• To left-click, press  .
• To right-click, press  .
• To operate your display software program (on a connected PC) which responds 

to page up/down commands (like Microsoft PowerPoint), press Page Up/Page 
Down.

• To return to the normal mode, press Mouse again or other keys except for the 

mouse related multi-function keys.

The projector can be assigned to 8 different remote control 
codes, 1 to 8. When several adjacent projectors are in 
operation at the same time, switching the remote control 
codes can prevent interference from other remote 
controls. Set the remote control code for the projector first 
before changing that for the remote control.

To switch the code for the projector, select from among 1 
to 8 in the SYSTEM SETTING: ADVANCED > Remote 
Control Code menu.

To switch the code for the remote control, press ID set and the corresponding button 
from 1 to 8 buttons on the remote control together for 5 seconds or more. The initial 
code is set to1. When the code is switched to 8, the remote control can control every 
projector.