Fujifilm 1x5 Superia x-tra 400 120 15341502 ユーザーズマニュアル
製品コード
15341502
– 3 –
FUJICOLOR SUPERIA X-TRA 400 [CH] • FUJIFILM PRODUCT INFORMATION BULLETIN
7. FILM HANDLING
•
Expose film before the expiration date indicated on
the film package and process as soon as possible
after exposure.
the film package and process as soon as possible
after exposure.
•
When loading and unloading roll film, avoid direct
sunlight. If there is no shade, turning one’s back to-
ward the sun will shade the film.
sunlight. If there is no shade, turning one’s back to-
ward the sun will shade the film.
•
Camera-loaded film should be exposed and pro-
cessed immediately.
cessed immediately.
•
Unprocessed film should be kept away from X-rays
used to inspect checked-in baggage, etc. at airport
terminals. Strong X-rays can cause fogging of un-
processed film. It is recommended such film be
placed in your carry-on baggage whenever possible.
(Consult with airport personnel for details.)
used to inspect checked-in baggage, etc. at airport
terminals. Strong X-rays can cause fogging of un-
processed film. It is recommended such film be
placed in your carry-on baggage whenever possible.
(Consult with airport personnel for details.)
•
Film fogging may occur near X-ray equipment used
in hospitals, factories, laboratories and other loca-
tions. Always keep film away from possible sources
of radiation.
in hospitals, factories, laboratories and other loca-
tions. Always keep film away from possible sources
of radiation.
9. SPECIFICATIONS AND PACKAGING
9-1 Specifications
Item
• Code
• Speed
• Type
• Process
• Speed
• Type
• Process
• Size
• Production Number
CH
ISO 400/27°
Daylight
CN-16, CN-16Q, CN-16FA,
CN-16L, CN-16S or C-41
135: 12-, 24- and 36-exp.
X01 and above
8. FILM STORAGE
Unprocessed Film
•
Storing exposed or unexposed film under hot and
humid conditions may adversely affect speed, color
balance and physical property changes. Store film
under the following conditions.
humid conditions may adversely affect speed, color
balance and physical property changes. Store film
under the following conditions.
Ï
Ordinary Storage: Protect from heat.
Ï
Long-term Storage: Below 0°C (32°F)
•
Building materials, finishes used on newly manufac-
tured furniture, paints and bonding agents may pro-
duce gases which affect photographic film. Do not
store film, lightproof boxes of film, loaded cameras or
film holders near these materials.
tured furniture, paints and bonding agents may pro-
duce gases which affect photographic film. Do not
store film, lightproof boxes of film, loaded cameras or
film holders near these materials.
•
Before use, allow films to stand at room-temperature
over 1 hour. Opening the package/box while film is
cold may cause harmful condensation.
over 1 hour. Opening the package/box while film is
cold may cause harmful condensation.
Processed Film
Exposure to light, high temperature and humid condi-
tions can cause color changes in processed films.
Therefore, place such films in sleeves and store them in
dark, dry, cool and well ventilated locations under the
following conditions.
tions can cause color changes in processed films.
Therefore, place such films in sleeves and store them in
dark, dry, cool and well ventilated locations under the
following conditions.
Ï
General Storage:
Below 25°C (77°F) at 30% to 60% RH
Ï
Long-term Storage:
Below 10°C (50°F) at 30% to 50% RH
NOTE
As with all color dyes, those used in this film will dis-
color or fade with time.
color or fade with time.
9-2 Edge Markings
Item
• Edge Stripe
• Type Designation
• Latent Image Bar Code
• FUJIFILM Identification
• Latent Image Bar Code
• FUJIFILM Identification
Code
Negative Carrier
Negative Carrier
: 135B
: 135C/D/J/K/S
One red solid line and one
green short broken line on one
side (changed)
400
12-8
0118
280