Sony VGN-FW200 マニュアル
VGN-FWxx Series Optical Disk Drive
Replacement Instructions
FOR TECHNICAL SUPPORT IN THE US CALL TOLL FREE 1-866-651-7669 FROM 9:00 AM TO 11:00 PM EST
P/N 994657000
Rev. A
2/2
Step 4. Using the enclosed magnetic
screwdriver, remove the two screws
securing the ODD Bay.
screwdriver, remove the two screws
securing the ODD Bay.
Step 5. To initiate the removal of the
ODD Bay, pull slightly the ODD door as
shown in the picture.
ODD Bay, pull slightly the ODD door as
shown in the picture.
Step 6. With even force, slide out the
ODD as shown. Some force may be
required to unlock the ODD from the
connector.
ODD as shown. Some force may be
required to unlock the ODD from the
connector.
(ODD Reinstallation) Steps 7-10
Step 7. Hold the new ODD Bay by the
edges and align it with the opening.
IMPORTANT! Install the new ODD in
the correct position as shown in picture.
the correct position as shown in picture.
Step 8. With an even force slide in the
new ODD Bay.
new ODD Bay.
Step 9. Make sure the new ODD Bay
is seated flush on the edge of the
computer.
is seated flush on the edge of the
computer.
Step 11. Reinstall the battery pack and
return the old ODD to Sony following the
included shipping instructions.
return the old ODD to Sony following the
included shipping instructions.
Step 10. Reinstall the two screws
previously removed.
previously removed.