Omnitron FlexPoint 100Fx/Tx 4330-0 プリント

TM

The FlexPoint 100Fx/Tx is a 100BASE-FX fiber to 100BASE-

TX  UTP  media  converter  that  provides  reliable  and  cost-

effective network connectivity and fiber extension.

The  FlexPoint  100Fx/Tx  UTP  port  auto-negotiates  to  the 

highest  level  of  performance  supported  by  the  attached 

device.  Manual switch settings and LED indicators with on-

the-label  descriptions  enable  easy  configuration  to  legacy 

devices or matching specific network requirements.

The  FlexPoint  100Fx/Tx  fiber  port  operates  at  1310nm  or 

1550nm and supports SC, ST, VF-45 or MT-RJ connectors. 

Multimode models support distances of up to 5km and single-

mode models support distances of up to 120km.

Diagnostic data is provided through LED indicators that assist 

in network installation and maintenance. The LEDs report 

the availability of power, port activity and link status,  duplex 

mode and error indicators.

The  FlexPoint  100Fx/Tx  features  a  crossover  switch  that 

eliminates  the  need  for  a  crossover  cable  and  facilitates 

connectivity  to  network  equipment  such  as  switches  or 

workstations.

FlexPoint modules can be mounted utilizing optional wall-

mounting hardware or with DIN-rail mounting brackets. They 

can also be rack-mounted in a 5-Module shelf or in a high-

density 14-Module, power-redundant Powered Chassis. 

FlexPoint modules installed in the 5-Module shelf or used 

as standalone devices can be powered by an external AC to 

DC power adapter, or through the 5VDC chassis connector.  

Standalone modules can also be powered by attaching an 

external DC power supply (18-60VDC).  When used in the 

14-Module  power-redundant  Powered  Chassis  with  any 

combination  of AC  and  DC  power  supplies,  the  installed 

modules are powered via the 5VDC chassis connector.

The wide variety of FlexPoint mounting and power options 

provide  flexible  upgrade  paths  as  network  requirements 

change and grow. 

FlexPoint  unmanaged  media  converters  are  easy  to  use 

and provide dependable fiber connectivity in Enterprise and 

Government networks around the world. 

The FlexPoint 100Fx/Tx is a 100BASE-FX fiber to 

 

■

100BASE-TX UTP media converter

Supports auto-negotiation of duplex modes for easy 

 

■

installation

Extends network distances up to 120km

 

■

Supports most network interfaces with a wide variety of 

 

■

cable and connector types

Labeled status LEDs and switches for quick and easy 

 

■

installation

Features a crossover switch for connection to switches 

 

■

or workstations

Wall-mount or rack-mount on a 5-Module shelf or  in 

 

■

a 14-Module power-redundant FlexPoint Powered 

Chassis

Completely software independent with no installation of 

 

■

drivers required

Peace-of-mind reliability backed by a lifetime warranty 

 

■

and free 24/7 technical support