Sony XM-2150GSX 仕様ガイド

ページ / 2
Design and Specifications subject to change without notice.
• 760W max power
• 150W x 2 into 4W, 20Hz-20kHz, @ 0.04% THD
• 380W x 1 into 4W, 20Hz-20kHz, @ 0.1% THD
• 190W x 2 into 2W, 20Hz-20kHz, @ 0.1% THD
• Differential FET Input Stage
• MOSFET Outputs
• MOSFET Power Supply
• Variable 50-300Hz Hi/Low Pass Filters
• 40Hz EQ Boost, RCA Output
• RCA & Speaker Level Inputs
XM-2150GSX
2/1 Channel Amplifier
2002 SONY MOBILE
   
PRODUCT GUIDE
Other Specifications
Circuit system 
OTL (output transformerless) circuit
Pulse power supply
Inputs 
RCA pin jacks
High level input connector
Outputs 
Speaker terminals
Through out pin jacks
Speaker impedance 
2 – 8 W (stereo)
4 – 8 W (when used as a bridging amplifier)
Maximum outputs 
300 W × 2 (at 4 W)
760 W (monaural) at 4 W
Rated outputs (supply voltage at 14.4 V)
150 W × 2 (20 Hz – 20 kHz, 0.04% THD, at 4W)
190 W × 2 (20 Hz – 20 kHz, 0.1% THD, at 2W)
380 W (monaural) (20 Hz – 20 kHz, 0.1% THD, at 4W)
Frequency response 
5 Hz – 100 kHz (+0.5dB, – 3 dB)
Harmonic distortion 
0.005% or less (at 1 kHz, 4W)
Input level adjustment range
0.2 – 6.0 V (RCA pin jacks)
0.4 – 12.0 V (High level input)
High-pass filter 
50 – 300 Hz, –12 dB/oct
Low-pass filter 
50 – 300 Hz, –12 dB/oct
Low boost 
0 – 10 dB (40 Hz)
Power supply voltage 
10.5 – 16 V
Current drain 
at rated output : 40 A (at 4W)
Remote input : 2 mA
Dimensions 
Approx. 14 1/8 × 2 1/4 × 10 1/2 in. (358 × 50 × 264 mm)
(w/h/d) not incl. projecting parts and controls
Mass 
Approx. 3.5 kg (7 lb. 11 oz.) not incl. accessories
Supplied accessories 
Mounting screws (4)
Audio Power Specifications
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
150 watts per channel minimum continuous average power into
4 ohms, both channels driven from 20 Hz to 20 kHz with no more
than 0.04% total harmonic distortion per Car Audio Ad Hoc
Committee standards