Sony HDR-UX20 マニュアル
133
A
d
d
iti
o
n
a
l In
fo
fo
rm
a
tio
n
3
Touch “×” displayed on the screen with the
corner of the “Memory Stick PRO Duo” or
the like 3 times. The position of “×”
changes.
Touch [CANCEL] to cancel.
corner of the “Memory Stick PRO Duo” or
the like 3 times. The position of “×”
changes.
Touch [CANCEL] to cancel.
If you did not press the right spot, try the
calibration again.
calibration again.
b
Notes
• Do not use a sharp-pointed object for
calibration. Doing so may damage the LCD
screen.
screen.
• You cannot calibrate the LCD screen if it is
rotated, or closed with the screen facing out.
On maintenance of the casing
• If the casing is soiled, clean the camcorder body
with a soft cloth lightly moistened with water,
and then wipe the casing with a dry soft cloth.
and then wipe the casing with a dry soft cloth.
• Avoid the following to avoid damage to the
finish:
– Using chemicals such as thinner, benzine,
– Using chemicals such as thinner, benzine,
alcohol, chemical cloths, repellent, insecticide
and sunscreen.
and sunscreen.
– Handling the camcorder with above
substances on your hands.
– Leaving the casing in contact with rubber or
vinyl objects for a long period of time.
On the pickup lens
• Do not touch the pickup lens inside the
disc cover. Keep the disc cover closed
except when inserting and removing the
disc, to keep dust out.
except when inserting and removing the
disc, to keep dust out.
• When your camcorder does not work
because the pickup lens is dirty, clean it
with a blower (optional). Do not touch the
pickup lens directly during cleaning
because this may cause the camcorder to
malfunction.
with a blower (optional). Do not touch the
pickup lens directly during cleaning
because this may cause the camcorder to
malfunction.
About care and storage of the lens
• Wipe the surface of the lens clean with a soft
cloth in the following instances:
– When there are fingerprints on the lens
– When there are fingerprints on the lens
surface.
– In hot or humid locations
– When the lens is exposed to salty air such as
– When the lens is exposed to salty air such as
at the seaside.
• Store in a well-ventilated location subject to
little dirt or dust.
• To prevent mold, periodically clean the lens as
described above. It is recommended that you
operate your camcorder about once a month to
keep it in optimum state for a long time.
operate your camcorder about once a month to
keep it in optimum state for a long time.
About care of the viewfinder
To remove dust from inside the viewfinder,
follow the procedure below.
follow the procedure below.
1
Pull out the viewfinder.
2
While pushing in the tab on the bottom
of the viewfinder with a fine-tipped
implement such as a ball point pen, pull
the eyecup block in the direction of the
arrow to remove.
of the viewfinder with a fine-tipped
implement such as a ball point pen, pull
the eyecup block in the direction of the
arrow to remove.
Pickup lens
Tab
Continued
,