Sony HDR-UX20 マニュアル
89
Cu
st
st
om
iz
iz
ing y
our c
a
m
co
rde
r
r
OFF (
)
Records without flash.
b
Notes
• The recommended distance to the subject when
using the built-in flash is approximately 0.3 to
2.5 m (1 to 8 feet).
2.5 m (1 to 8 feet).
• Remove any dust from the surface of the flash
lamp before using it. Flash effect may be
impaired if heat discoloration or dust obscures
the lamp.
impaired if heat discoloration or dust obscures
the lamp.
•
/CHG lamp (p. 139) flickers while charging
the flash, and remains lit when charging is
complete.
complete.
• If you use the flash when shooting a backlit
subject or in bright places, the flash may not be
effective.
effective.
You can set this function when you shoot
still images using the built-in flash, or an
external flash (optional) that is compatible
with your camcorder.
still images using the built-in flash, or an
external flash (optional) that is compatible
with your camcorder.
HIGH(
)
Makes the flash level higher.
B
NORMAL( )
LOW(
)
Makes the flash level lower.
You can set this function when you shoot
still images using the built-in flash, or an
external flash (optional) that is compatible
with your camcorder.
Set [REDEYE REDUC] to [ON], then set
[FLASH MODE] (p. 88) to [AUTO] or
[ON] to display
still images using the built-in flash, or an
external flash (optional) that is compatible
with your camcorder.
Set [REDEYE REDUC] to [ON], then set
[FLASH MODE] (p. 88) to [AUTO] or
[ON] to display
.
You can prevent redeye by activating the
flash before recording.
flash before recording.
b
Notes
• The redeye reduction may not produce the
desired effect due to individual differences and
other conditions.
other conditions.
Adjusts the focus/color/exposure of face
images automatically. Also, adjusts face
images for clear viewing.
images automatically. Also, adjusts face
images for clear viewing.
B
ON (
)
Detects face images in frames, then adjusts
their image quality automatically.
their image quality automatically.
ON [NO FRAMES] (
)
Detects face images without frames, then
adjusts their image quality automatically.
adjusts their image quality automatically.
OFF
Face images are no detected.
b
Notes
• Your camcorder may not be able to detect face
images depending on the recording condition.
• Your camcorder may not be able to optimize the
images depending on the recording condition. In
this case, set [FACE DETECTION] to [OFF].
this case, set [FACE DETECTION] to [OFF].
The camcorder detects faces automatically
during movie recording. The default setting
is [ON].
during movie recording. The default setting
is [ON].
Face icons and their meanings
: This icon appears when the setting is
[ON].
: This icon flashes when your
camcorder detects a face. The icon
stops flashing when the face is
recorded in the Face Index.
stops flashing when the face is
recorded in the Face Index.
: This icon appears when faces cannot
be recorded in the Face Index.
FLASH LEVEL
REDEYE REDUC
FACE DETECTION
INDEX SET
Face detection frame
Face detection icon
Continued
,