D-Link DSL-2640U (ANNEX B) ユーザーズマニュアル
DSL-2640U ADSL Annex B/Ethernet Router with Wi-Fi and Built-in Switch
User Manual
Configuring via Web-based Interface
CHAPTER 4. CONFIGURING VIA WEB-BASED
INTERFACE
Status
This menu displays data on the current state of the router. The following data are represented:
DSL
connection status, active WAN connections, IP addresses leased by DHCP server, the routing table,
network statistics, and data on network devices connected to the router.
network statistics, and data on network devices connected to the router.
Network Statistics
On the Status / Network statistics page, you can view statistics for all interfaces (connections)
existing in the system. For each connection the following data are displayed: state, IP address,
subnet mask and gateway (if the connection is established), MAC address, MTU value, and volume
of data received and transmitted (with increase of the volume the units of measurement are changed
automatically: byte, Kbyte, Mbyte, Gbyte).
existing in the system. For each connection the following data are displayed: state, IP address,
subnet mask and gateway (if the connection is established), MAC address, MTU value, and volume
of data received and transmitted (with increase of the volume the units of measurement are changed
automatically: byte, Kbyte, Mbyte, Gbyte).
Figure 21. The Status / Network statistics page.
Page 29 of 104