KitchenAid 2.0-Quart Kettle with Full Stainless Steel Handle and Trim Band 使用とお手入れ
6
USING YOUR KETTLE
• Before use, wash with hot, soapy water.
Rinse and dry exterior.
• Overheating can make kettles with
porcelain enamel bottoms fuse to the
surface of glass cooktop ranges, requiring
the replacement of the glass cooktop. Do
not leave the kettle on a glass cooktop;
remove it, and place on a heat-resistant
surface such as a cutting board.
• Always lift the kettle when removing
it from the cooktop surface. Sliding or
dragging may damage the cooktop surface
or base of the kettle.
• This kettle is not intended for commercial
or restaurant use.
• For best results, match the kettle base
size with the cooktop burner size. Do not
allow gas flames to extend up the side of
the kettle.
• Avoid overfilling the kettle. Maximum fill
level is below the bottom of the spout.
The kettle should be at least half full
before boiling. Do not allow the kettle
to boil dry.
• Ensure that the kettle lid is securely
seated on top of the kettle.
• For best results, heat the kettle on
medium to medium high heat.
• When the kettle begins to whistle, the
water is heated. For proper whistling
to occur, ensure that the water level is
below the spout of the kettle and that
the lid is securely seated.
• Allow the kettle to cool on a heat-
resistant surface. Do not leave kettle
on a hot burner.
• Contact KitchenAid if the kettle fails
to whistle while still under warranty.