KitchenAid Custom Pour Over Brewer 使用とお手入れ

Calcium deposits (scale) from water will build up in the Coffee Brewer over time and impair 

brewing efficiency and coffee quality. If you notice that it takes longer than usual to brew, 

or that the Coffee Brewer is making unusual noises, then it is time to descale. The “Clean” 

indicator will flash when the Coffee Brewer needs to be cleaned. Descaling should be done 

as soon as possible to preserve the performance and life of your Coffee Brewer.

NOTE: The Coffee Brewer can be  

descaled by using a packaged descaling  

agent, which can be found at various  

retail stores or online.
Follow the directions on the package for  

the recommended ratios of descaling agent 

and water to use.
The Coffee Brewer should be run through  

a complete Clean cycle using a full tank of 

the descaling solution.
NOTE: The Clean cycle can be completed 

at regular intervals, if desired, without  

the “Clean” indicator needing to light up. 

Follow step 1, then press MENU three  

times and finally SET to manually activate  

the Clean cycle.

When the “Clean” indicator begins to 

flash: Press the SET button. The “Clean” 

indicator will turn on while the cycle 

runs. In Clean mode, the Coffee Brewer 

will empty the water tank, no matter 

how many Cups were selected from 

previous cycle settings. When the  

Clean cycle is complete (approximately  

9 minutes), the “Clean” indicator will 

turn off. The Coffee Brewer is ready  

to use again.

Before descaling, make sure the brew 

basket contains no coffee or coffee 

filters, and fill the tank with fresh water 

to the 8 cup fill line.

Wash the brew basket, carafe, and filter 

clip in the top rack of the dishwasher, or 

wash by hand in hot, soapy water, then 

rinse with warm water. Dry all parts 

thoroughly before reassembling the 

Coffee Brewer.

W10661890A_EN_Final2.indd   14

7/2/14   9:48 AM