KitchenAid 20.9 Cu. Ft. 36" Width Built-In Panel Ready Platinum Interior Bottom Mount Refrigerator インストールガイド

Stainless Steel and Overlay Series Both 

36" and 42" models have the same 

cabinet side trim

All factory parts are available through your KitchenAid dealer or 
by calling KitchenAid Parts and Accessories at 1-800-442-9991. 
In Canada, call 1-800-807-6777.

The following handle style is available. Contact your KitchenAid 
dealer or KitchenAid Parts and Accessories at 
1-800-442-9991. In Canada, call 1-800-807-6777.

The width and height of a side panel are determined by the type 
of installation you are planning. 

■

The dimensions shown are actual product dimensions 
and may not reflect the needed panel installation 
dimensions.

■

The side panel should be a minimum of 

¹⁄₂" (1.27 cm) thick 

to avoid warping.

■

If the opening depth is 25" (63.5 cm) or more, you may 
want to install a support board on the rear wall.

1. Measure the distance from point A (as shown) to the back 

wall. Add 

1

⁄

16

" (1.6 mm) to this measurement to allow the side 

panel to fit into the trim.

2. If the panel is more than 

¹¹⁄₃₂" (8.7 mm) thick, rout the front 

edge to allow the side panel to fit into the trim.

1. Measure the distance from point A (as shown) to back wall.

2. Rout the front edge of the support board or attach a 

¹¹⁄₃₂" (8.7 mm) board to hold the panel in the cabinet side trim.