KitchenAid KXU2830YSS 寸法図
PRODUCT MODEL NUMBERS
VENTING REQUIREMENTS
KXU2830YSS
KXU2836YSS
Electrical:
120 volt, 60 Hz, AC only, 15-amp electrical supply.
30" (76.2 cm) and 36" (91.4 cm) Slide-Out Range Hood
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Instructions packed with product. Specifications subject to change without notice.
Ref. W10342488A
3/15/12
●
Vent system must terminate to the outside, except for non-vented
(recirculating) installations.
(recirculating) installations.
●
Do not terminate the vent system in an attic or other enclosed area.
●
Do not use a 4" (10.2 cm) laundry-type wall cap.
●
Use metal vent only. A rigid metal vent is recommended. Plastic or
metal foil vent is not recommended.
metal foil vent is not recommended.
●
The length of the vent system and number of elbows should be kept
to a minimum to provide efficient performance.
to a minimum to provide efficient performance.
For the most efficient and quiet operation:
●
Use no more than three 90° elbows.
●
Make sure there is a minimum of 24" (61.0 cm) of straight vent
between the elbows if more than 1 elbow is used.
between the elbows if more than 1 elbow is used.
●
Do not install 2 elbows together.
●
The vent system must have a damper. If the roof or wall cap has a
damper, do not use the damper supplied with the range hood.
damper, do not use the damper supplied with the range hood.
●
Use clamps to seal all joints in the vent system.
●
Use caulking to seal exterior wall or roof opening around the cap.
●
The size of the vent should be uniform.
Calculating Vent System Length
To calculate the length of the system you need, add the equivalent feet
(meters) for each vent piece used in the system.
(meters) for each vent piece used in the system.
Vent Piece
6" (15.2 cm) Round
45° elbow 2.5
ft
(0.8 m)
90° elbow 5.0
ft
(1.5 m)
90˚ elbow
3 ft
(0.93 m)
6 ft (1.8 m)
Wall cap
Maximum Length
= 35 ft (10.7 m)
1 - 90° elbow
= 5.0 ft (1.5 m)
1 - wall cap
= 0.0 ft (0.0 m)
9 ft (2.8 m) straight
= 9.0 ft (2.8 m)
System length
= 14.0 ft (4.3 m)
Example vent system
Page 1 of 2
VENTING METHODS
This range hood is factory set for venting through the roof or through
the wall.
The vent system needed for installation is not included. A 6" (15.2 cm)
round vent system is recommended.
the wall.
The vent system needed for installation is not included. A 6" (15.2 cm)
round vent system is recommended.
Roof Venting Wall Venting
A. 6" (15.2 cm) vent through
the roof
B. Roof cap
A. 6" (15.2 cm) vent through
the wall
B. Wall cap
A
B
A
B
Non-Vented (recirculating) Installations Through the
Soffit/Cabinet
Soffit/Cabinet
If it is not possible to vent cooking fumes and vapors to the outside, the
range hood can be used in the non-vented (recirculating) version, using a
charcoal filter. Recirculation Kit Part Number W10356918 is available from
the dealer or an authorized parts distributor. Damper installation is not
required.
range hood can be used in the non-vented (recirculating) version, using a
charcoal filter. Recirculation Kit Part Number W10356918 is available from
the dealer or an authorized parts distributor. Damper installation is not
required.
A. Ceiling
B. Vent cover
B. Vent cover
C. Soffit
D. 6" (15.2 cm) vent
E. Range hood
F. Cabinet
F. Cabinet
A. Range hood
B. Vent system
B. Vent system
C. Top of cabinet
D. Vent cover
E. Ceiling or soffit
A
A
B
B
C
D
D
E
E
F
F
A
B
C
D
E