KitchenAid 15" Electric Cooktop with 2 Radiant Elements インストールガイド

Make Electrical Connection

For 15" (38.1 cm) model only:

For all models except 15" (38.1 cm) model:

This cooktop is manufactured with a frame connected, green or
bare ground wire. Connect the cooktop cable to the junction box
through the UL listed or CSA approved conduit connector.

1. Disconnect power.

2. Remove junction box cover, if present.

3. Connect the flexible cable conduit from the cooktop to the

junction box using a UL listed or CSA approved conduit
connector.

4. Tighten screws on conduit connector if present.

5. See “Electrical Connection Options Chart” to complete

installation for your type of electrical connection.

Electrical Connection Options Chart

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Use 12 gauge copper wire.

Electrically ground cooktop.

Failure to follow these instructions can result in death,
fire, or electrical shock.

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Use 8 gauge copper wire.

Electrically ground cooktop.

Failure to follow these instructions can result in death,
fire, or electrical shock.

For cooktops with a 4-wire cable:

If your home has:

If your cooktop has:

Go to Section:

4-wire

4-Wire Cable
from Home
Power Supply to
4-Wire Cable
from Cooktop

3-wire

4-Wire Cable
from Home
Power Supply to
3-Wire Cable
from Cooktop

For cooktops with a 3-wire cable:

3-wire

4-wire

3-Wire Cable
from Home
Power Supply to
4-Wire Cable
from Cooktop

3-wire

3-Wire Cable
from Home
Power Supply to
3-Wire Cable
from Cooktop

½"

(1.3 cm)

¹⁄₂

(1.3 cm)

¹⁄₂

½"

(1.3 cm)

¹⁄₂

(1.3 cm)

¹⁄₂