Nikon AF-S DX 10-24mm f/3.5-4.5G ED ユーザーズマニュアル

■ The built-in flash and vignetting

• The built-in flash cannot be used over distances of 

less than 0.6 m (2.0 ft.).

• To prevent vignetting, do not use the lens hood.
* Vignetting is the darkening of the corners around the 

image that occurs when the light emitted by the flash 
is obstructed by the lens hood, or lens barrel, 
depending on the focal length or shooting distance.

Built-in flash on the D100 has an angle of coverage 
suited to focal lengths of 20mm and greater. Vignetting 
occurs at a focal length of 18mm.

■ Using the lens hood

Align the lens hood attachment index (

A

, either of 

two indexes) 2 on the hood with the lens hood 
mounting index 4 on the lens, and turn the hood 
counterclockwise (as viewed when holding the camera 
with the lens facing away from you) until it clicks into 
place (Fig. B).
• Be sure that the lens hood mounting index is aligned 

with the lens hood setting index (

B

) 3.

• If the lens hood is not correctly attached, vignetting 

may occur.

• To facilitate attachment or removal of the hood, hold 

it by the base (near the lens hood attachment index) 
rather than its outer edge.

• To store the lens hood, attach it in the reverse 

position.

Hold the lens hood by the base (near the lens hood 
attachment index) and turn clockwise, as viewed when 
holding the camera with the lens facing away from you, 
to detach.

D700 • 18mm/No 

restriction

D300/D200/
D100

• 18mm/1.5 m (4.9 ft.) or greater
• 20mm/1 m (3.3 ft.) or greater
• 24mm/No restriction

D90/D80/D50

• 20mm/2.5 m (8.2 ft.) or greater
• 24mm/1 m (3.3 ft.) or greater

D70-series

• 24mm/1 m (3.3 ft.) or greater

D60

• 24mm/1.5 m (4.9 ft.) or greater

D40-series

• 24mm/2.5 m (8.2 ft.) or greater