Nikon WT-3A (D200) ユーザーズマニュアル

Creating ftp Profi les Using the Camera Menus
In transfer mode, the camera menus can be used to create ftp profi les in place of 
the WT-3 Setup Utility.  Before creating an ftp profi le with the camera menus, set 
the camera USB option to PTP and connect the WT-3.  To prevent unexpected loss 
of power, be sure the battery is fully charged or use an optional EH-6 AC adapter.  
The drain on the battery can be reduced by selecting Off  for the Wireless trans-
mitter > Wireless LAN system option in the camera setup menu before adjusting 
ftp settings.

1 

Turn the camera on.

2 

Select  Transfer mode for  Wireless transmit-

ter > Mode (  34).

The WT-3 uses TCP ports 20 and 21 for ftp.  It may be necessary to adjust fi rewall settings 
before connecting to a server behind a fi rewall (  16).

If  the shutter-release button on the camera or WT-3 is pressed while menus are displayed, 
the monitor will turn off  and any changes to the current profi le will be lost.  Do not press the 
shutter-release button while editing profi les.

See the Menu Guide for information on using the camera menus to edit existing ftp profi les 
(  35).

3 

A profi le list will be displayed showing the con-

nections available in transfer mode.  Highlight 
FTP registration and press the multi selector to 
the right.  Note a new ftp profi le can not be cre-
ated if the camera already contains nine profi les; if 
necessary, delete a profi le using the 

 

button.