Canon imageFORMULA CR-190i II マニュアル

ページ / 61
10
■ When you remove the power cord, grip it by the power plug head. 
Never attempt to disconnect the power cord from the power outlet 
by pulling on the power cord. Doing so may damage or expose the 
cord’s internal wiring, and cause a fire or electrical shock.
■ Keep the area around the power outlet clear of all obstacles so you 
can disconnect the power cord easily at all times.
■ Never spill water or volatile solutions (alcohol, benzene, paint 
thinner) into the scanner. Doing so may cause a fire or electrical 
shock.
■ When the scanner is not being used for a long period of time, 
disconnect the power cord from the power outlet.
■ Avoid wearing loose fitting clothing, dangling jewelry, long ties, or 
long hair that could become entangled with moving parts, especially 
the rollers that feed paper into the scanner. If such objects become 
entangled, immediately disconnect the power plug from the power 
outlet to stop the scanner.
■ Be careful when you are loading a document or clearing a paper 
jam. It is possible that the paper edges may cut your fingers.
■ Do not open the Maintenance Cover while the scanner is operating. 
Doing so may result in a malfunction or injury.
■ Do not touch the pins and contacts on the scanner’s connector with 
your hands. Doing so may result in a malfunction.
■ Do not touch anything except the operation buttons when the jogger 
is operating (CR-190i II/CR-190i II UV only) or documents are being 
fed.
■ Do not turn the scanner upside down. The ink may leak from the ink 
disposal tank.
Installation Location
For operation, maintenance, and ventilation, make sure that there is 
enough space around the scanner, as shown in the illustration above.
Avoid placing the scanner in the following places. It may cause a 
malfunction and adversely affect the scanner or your computer.
• Places exposed to direct sunlight
If installation in such places is unavoidable, provide a curtain or 
similar object to shade the scanner.
• Places subject to dust and fumes
Dust and cigarette fumes adversely affect the components inside the 
scanner.
• Near running water, a heat source, water vapor, or in an area, such 
as a laboratory exposed to ammonia gas, paint thinner, or other 
volatile chemicals
• Places subject to excessive vibration and shock
100 mm (3.9")
706 mm (27.8")
356 mm (14")
4
66 mm (18.3")
125 mm (5")