Canon imageFORMULA CR-190i II マニュアル

Connect the CR-135i II/CR-190i II to a computer as follows. Make sure 
to install the software before connecting the scanner to a computer.
•  If you connect the computer and turn ON the CR-135i II/CR-190i II 

before installing the software, the following wizard screen appears. If 
this happens, click [Cancel], turn OFF the CR-135i II/CR-190i II, and 
then install the software.
The following wizard screen is an example in Windows Vista. When a 
similar wizard screen appears in Windows XP/7/8/8.1/10, click 
[Cancel]. 

A

Install the software

Install the Scanning Utility for CR-135i/CR-190i in the setup disc 
provided with the CR-135i II/CR-190i II. (See “Installing the 
Software,” on p. 19.)

B

Connect the scanner to a computer

Connect the CR-135i II/CR-190i II and the computer with a USB. 
(See “Connecting the Scanner to a Computer,” on p. 20.)

C

Turn ON the power

Turn ON the power of the CR-135i II/CR-190i II. (See “Turning ON 
the Power,” on p. 21.)

D

Automatically installing the device driver

The device driver is installed automatically when Windows 
recognizes the CR-135i II/CR-190i II as new hardware. (See 
p. 22.)

Wizard Screen (Windows Vista)