Canon imageFORMULA CR-190i II マニュアル

A Click [Scan Batch to Printer] from the [File] menu.
B Select Simplex or Duplex, and then click [Start Scanning].

• You can also start scanning with pressing the START Button.

F

Scanning starts.

• If “Sort Method” is set in the software application, the document will be 

ejected to one of the three Eject Pockets according to the sort methods 
that have been set.

• When printing with the imprinter, ink may get on the leading edge of the 

document because the documents are ejected onto the printed surface.

• When Using the Accompanying Scanning Utility for CR-135i/CR-190i:

Scanning is suspended and a message is displayed when the Eject 
Pocket becomes full of documents. Scanning resumes when the 
documents are removed from the Eject Pocket (Eject Pocket full 
detection). This function is available only on CR-135i II/CR-190i II/CR-190i 
II UV.

When documents that are 120 to 139 mm in length are ejected into Eject 
Pocket 3, scanning may resume even if the pocket is not completely 
empty. Make sure to remove all of the documents at one time when 
removing such documents from this eject pocket.

If you configure scanning conditions that consume a large amount of the 
computer’s memory, scanning may stop because of insufficient memory. If 
an error message appears due to insufficient memory while scanning is in 
progress, exit the application, change the scanning conditions, and then try 
scanning again.

Flapper
Separates documents